RunRyder RC
 0  Topic Subscribe
WATCH
 1 page 521 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
Mikado
Other › Question regarding Logo head assembly
09-10-2007 06:18 PM  10 years agoPost 1
Tap or Snap

rrApprentice

Port Richey, Florida and Burlington, Wisconsin

My Posts: All  Forum  Topic

Good Day,
I have a new Logo 20 (stretched) that I been putting together. Im not sure if I have the head assembled correctly as the manual doesnt show the longer arms and metal flybar spacers. This must be the updated head. Could someone look at the pics and tell me if its right or what I did wrong. The way I have it is the only way I could see it going together as these are the parts that came with the kit. I built a Logo 10 and I liked it so much (so stable) that I purchased a Logo 20 and the stretch kit to swing 680 blades for a scale application. I realize that the Logo 20 is no longer made and feel lucky to find a kit.

Regards

JEFF

PM  EMAIL  GALLERY  Attn:RR
09-10-2007 06:38 PM  10 years agoPost 2
Jag72

rrProfessor

South of Boston

My Posts: All  Forum  Topic

Head assembly...

Looks good...the only thing that you may want to check is the position of the ball links on the double links that go to the flybar...there are 4 holes...I think you need to use the upper right(outside right) hole...It looks like you have it on the lower left side hole...

Anthony

PM  EMAIL  GALLERY  Attn:RR
09-10-2007 08:22 PM  10 years agoPost 3
Tap or Snap

rrApprentice

Port Richey, Florida and Burlington, Wisconsin

My Posts: All  Forum  Topic

Thanks for the help Anthony. I will move them to the top and to the outside hole.

JEFF

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 521 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
Mikado
Other › Question regarding Logo head assembly
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Thursday, September 21 - 2:23 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online