RunRyder RC
 7  Topic Subscribe
WATCH
 1 page 1655 views
Scorpion Power Scorpion Power
HelicopterAlignOther › How to check for interaction ?
08-11-2007 07:35 AM  10 years agoPost 1
afeitang

rrNovice

Hawaii

My Posts: All  Forum  Topic

I was flying Raptor, now i moved to 600N. It is a fast and nice 600n basic. I am new to the CCPM. I am using XP9303, please help for set up and check for interaction.

PM  EMAIL  GALLERY  Attn:RR  Quote
08-11-2007 01:21 PM  10 years agoPost 2
kingair

rrKey Veteran

Utah - USA

My Posts: All  Forum  Topic

Either use a swash leveler or read this:

http://www.runryder.com/helicopter/...1/?p=1297231#RR

There is a very fine line between "hobby" and "mental illness."

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-11-2007 02:05 PM  10 years agoPost 3
MrMel

rrProfessor

Gotland

My Posts: All  Forum  Topic

Dont forget setting EXP=ACT in the swash menu, else you wont get it right regardless how much you try.

PM  EMAIL  GALLERY  Attn:RR  Quote
08-11-2007 09:12 PM  10 years agoPost 4
FlaHeli

rrApprentice

Jacksonville. Fl-USA

My Posts: All  Forum  Topic

I just made a simple level that I can attach to the swash as it moves. I just trim everything so that the bubbles in either direction do not move as I move through the collective range. Then I move elevator and make sure the aileron bubble stays put and vice versa for the elevator when moving the aileron.

I use plates in place of blades just for convenience and the yellow rubber boots off the vise make a great holder on the grips.

PM  EMAIL  Attn:RR  Quote
08-14-2007 06:53 AM  10 years agoPost 5
afeitang

rrNovice

Hawaii

My Posts: All  Forum  Topic

Tahnk you all.

PM  EMAIL  GALLERY  Attn:RR  Quote
08-15-2007 07:18 PM  10 years agoPost 6
Johnno

rrApprentice

Southern Illinois

My Posts: All  Forum  Topic

I just put a cyclock on my Rex, combined with my laptop its a brainless procedure, and zero interaction from top to bottom and a built in electronic cyclic ring.

PM  EMAIL  Attn:RR  Quote
08-15-2007 11:16 PM  10 years agoPost 7
airman02

rrApprentice

Southern Illinois

My Posts: All  Forum  Topic

I have seen Johnno's cyclock in action and it is sweet! It sure makes things simple.

PM  EMAIL  Attn:RR  Quote
08-15-2007 11:38 PM  10 years agoPost 8
afeitang

rrNovice

Hawaii

My Posts: All  Forum  Topic

Where can i buy cyclock? How does it work?

PM  EMAIL  GALLERY  Attn:RR  Quote
08-16-2007 12:16 AM  10 years agoPost 9
702nitro

rrKey Veteran

Las Vegas, NV

My Posts: All  Forum  Topic

Doesn't this device require that both the surface and heli be dead on balls accurate for this leveling tool to work?

PM  EMAIL  GALLERY  Attn:RR  Quote
09-08-2007 09:46 PM  10 years agoPost 10
tim deakin

rrVeteran

gloucestershire uk

My Posts: All  Forum  Topic

What is interaction? I'm setting up a Sylphide at the moment with 120deg eccpm,when I move the elevator quickly back and forth the whole swash plate moves up and down on the main shaft and then levels off.Is this interaction?

PM  EMAIL  Attn:RR  Quote
09-09-2007 03:42 PM  10 years agoPost 11
inkspot1967

rrProfessor

Cranston Ri

My Posts: All  Forum  Topic

you can easily tell if you have interaction by just moving full collective up and full down slowly and look at the paddles there should be no movement of the paddles

then on ail put collective full pos pitch then move ail full left and right slowly and look at the ball on the swash it should not move at all. then check at full neg pitch and do the same above

do same on elev.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-09-2007 09:14 PM  10 years agoPost 12
rapirex

rrNovice

france

My Posts: All  Forum  Topic

hy im a french and i whant now if in the XP9303 programe whe can change trotle and gaz mixe because i pilote to the mode 1 and in my shop are in mode 2 thank you

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 1655 views
Scorpion Power Scorpion Power
HelicopterAlignOther › How to check for interaction ?
 Print TOPIC  Make Suggestion 

 7  Topic Subscribe

Sunday, November 19 - 7:40 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online