RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 553 views
Scorpion Power Scorpion Power
Helicopter
e-
Align
T-REX 450 › 401 and 5 channel setup in HH mode???
08-11-2007 05:16 AM  10 years agoPost 1
menace

rrKey Veteran

Sydney, Australia

My Posts: All  Forum  Topic

can a 401 be setup in HH mode without the gain wire conected?

!boo!

PM  EMAIL  GALLERY  Attn:RR  Quote
08-11-2007 06:10 AM  10 years agoPost 2
HHawk

rrVeteran

Gardnerville Nv.

My Posts: All  Forum  Topic

Hows the gain gona work if its not connected? A 401 will work with it set to HH from the get go though. No need for neutral center.

PM  EMAIL  GALLERY  Attn:RR  Quote
08-11-2007 06:22 AM  10 years agoPost 3
menace

rrKey Veteran

Sydney, Australia

My Posts: All  Forum  Topic

i have a 6ch Rx and i need to plug in 3servos, ESC, 401, and a BEC

can i use a 'Y' harness for the BEC on the 'GAIN' channel of the 401?

!boo!

PM  EMAIL  GALLERY  Attn:RR  Quote
08-11-2007 06:44 AM  10 years agoPost 4
HHawk

rrVeteran

Gardnerville Nv.

My Posts: All  Forum  Topic

I have heard of guys doing this, the bat/bec does not require a specific channel, so that would be the one to "Y"

PM  EMAIL  GALLERY  Attn:RR  Quote
08-11-2007 10:20 AM  10 years agoPost 5
Corona44

rrApprentice

Sydney,NSW Australia

My Posts: All  Forum  Topic

Menace,

Really enjoyed flying with you today, it was a blast, still got grin on my face after that double 720 deg piro while verticle then coming out backwards!

Yes, you could use a Y cable on any channel to inject power into the RX from the BEC but you risk adding additional resistance from extra thing wire and more contacts etc.

A better solution would be to open up the RX case and solder a servo tail lead directly to the power "bus" rails that run along the PCB joining all the channels.

You then end up with a receiver have a servo lead exiting the case that you plug into your (6V?) BEC and you won't need the Y lead.

Flying, crashing & having a ball.

PM  EMAIL  GALLERY  Attn:RR  Quote
08-11-2007 12:43 PM  10 years agoPost 6
TomRex

rrElite Veteran

West Palm Beach ​Join Date:​12-28-2005

My Posts: All  Forum  Topic

Plug the throttle signal lead into the bec signal slot of the bec lead, plug into the Rx throt chan! Y you ask? not needed now.

Ignorance is the absence of facts.Stupid is lacking the intellectual capacity to comprehend the fact

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-11-2007 01:22 PM  10 years agoPost 7
menace

rrKey Veteran

Sydney, Australia

My Posts: All  Forum  Topic

thanks to ALL, i was helping a mate out and I know nothing about 'bec' and stuff so i thought i'd consult the INTERNATIONAL Heli council.....thanks again

Cheers

!boo!

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 553 views
Scorpion Power Scorpion Power
Helicopter
e-
Align
T-REX 450 › 401 and 5 channel setup in HH mode???
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Wednesday, November 22 - 4:03 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online