RunRyder RC
 8  Topic Subscribe
WATCH
 1 page 769 views
Scorpion Power Scorpion Power
HelicopterAlignOther › Am I going to be a proud owner of a 600N?
08-09-2007 10:22 PM  10 years agoPost 1
2Can

rrApprentice

Norway

My Posts: All  Forum  Topic

...ok, look...I've got my mouse-pointer over the "Buy Now" button, ready to order a 600N.

Tell me why I should buy it, and which parts I should order at the same time (and I don't mean servo's, gyro, blades and that stuff...)

...and while you're at it, throw in a couple of arguments I should use with my wife

Quando omnitus flunkus moritati (50SE/90SE(sold)/600nPro)/T-Rex 450SE v2

PM  EMAIL  GALLERY  Attn:RR  Quote
08-09-2007 10:32 PM  10 years agoPost 2
geneween

rrNovice

Mission Viejo

My Posts: All  Forum  Topic

I've had mine for a week now and the only thing that sucked was the oneway bearing...other than that it's a blast to fly....I was thinking of getting my Raptor 50 going again but have now decided to re-think that and maybe just get another T6N....

On the oneway make sure you clean out all the grease from Align with ALcohol and then soak the thing with Tri-Flow before you put it in and make sure you do that about every other gallon...So far I've pumped 2 gallons through it. the fisrt untreated bearing lasted 2 flights, the second one has about 14 flights on it and still going strong....

Geneween

PM  EMAIL  Attn:RR  Quote
08-09-2007 10:38 PM  10 years agoPost 3
trex600nitro

rrNovice

Charleston

My Posts: All  Forum  Topic

I just got mine last week and done the following upgrades. I put the boca oneway bearing in. Also got the gyro mount and servo wheels which was a big help. Also got the infinavation dampners. I couldnt resist doing a full metal head either

PM  EMAIL  Attn:RR  Quote
08-09-2007 10:58 PM  10 years agoPost 4
ren

rrVeteran

Houston, TX

My Posts: All  Forum  Topic

bearing

hi whats that re those bearing that need to be replace i just order one kit!!!!
thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
08-09-2007 11:02 PM  10 years agoPost 5
702nitro

rrKey Veteran

Las Vegas, NV

My Posts: All  Forum  Topic

and while you're at it, throw in a couple of arguments I should use with my wife
Tell your wife that you don't want her to see you angry, she won't like you when you're angry

PM  EMAIL  GALLERY  Attn:RR  Quote
08-09-2007 11:14 PM  10 years agoPost 6
geneween

rrNovice

Mission Viejo

My Posts: All  Forum  Topic

the oneways lock up...so just clean the one you get in the kit with alcohol to get the old grease out then soak it in Tri-flow and it should be good, at least mine has...

I also got the Servo arms and gyro mount both are pretty good additions...

Geneween

PM  EMAIL  Attn:RR  Quote
08-09-2007 11:31 PM  10 years agoPost 7
j5coat

rrVeteran

Phoenix

My Posts: All  Forum  Topic

if its going to lock no ammount of triflow or any magic lube is going to help, you need to replace the bearing. my stock bearing had a larger ID then the same exact bearing i bought at the LHS for the 600E. just replaced the bearing and it been working great. The sleeve was much tighter in the new bearing like its supposed to be, and i have had no problems, and i didnt even oil the thing. so if it locks up just replace it with say a boca bearing or one from RC-bearings. com, and you should not have any more problems.

Trex 700, Trex 600n

PM  EMAIL  GALLERY  Attn:RR  Quote
08-09-2007 11:54 PM  10 years agoPost 8
rcmarty

rrVeteran

Penticton , B.C.​CANADA

My Posts: All  Forum  Topic

Well i'm glad i boght mine.

At the recent heli fun-fly there were about 30 heli's , around 20 flying. 6 of them were 600n's

Of all the flying done at the meet , i'd say 80% of the flights were with the 600n's.

Even the guys who brought the 600's along with other brands didn't fly them as much.

The servo's varied abit (some 8v servo's there :eek but the hyper 50 , mp5's, 611's , 14 pitch , 8 cyclic , radiax , 2000-2100 hs seemed to be the norm.

Martin

What goes up will come down.... one way or another !

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
08-10-2007 02:13 AM  10 years agoPost 9
Rockohaulic

rrElite Veteran

Canyon Country, CA,​USA, 3rd Rock from​the Sun

My Posts: All  Forum  Topic

I sold my Raptor 50 V2 airframe, the Kasama Head, The Kasama Fan, an old Quick UK Fan, and various Raptor parts, and I more than paid for the Trex Sport!

So tell her you can make some money in the transition...........

Saturday morning I flew my helicopter in my pajamas
How it got in my pajamas I'll never know

PM  EMAIL  GALLERY  Attn:RR  Quote
08-10-2007 02:24 AM  10 years agoPost 10
A. Bundy

rrElite Veteran

Aurora,IL. 30W/SW of​Chicago

My Posts: All  Forum  Topic

Tell me why I should buy it
The owner needs a new Caddy.

PM  EMAIL  GALLERY  Attn:RR  Quote
08-10-2007 03:49 AM  10 years agoPost 11
Ozydego

rrKey Veteran

Westerville, Ohio

My Posts: All  Forum  Topic

The servo arms and gyro mount are very nice additions, the new canopy mounts are shorter and eliminate servo rub, also strengthens the whole machine... othe than that, maybe metal blade grips...

But Honey, I can't live with just stock.....

PM  EMAIL  GALLERY  Attn:RR  Quote
08-10-2007 04:18 AM  10 years agoPost 12
Caseyho04

rrNovice

Hongkong

My Posts: All  Forum  Topic

My upgrade parts for 600N:
- metal blade grips
- main mast bearing
- tail T-type arm
- 3DX fan

- one way bearing always lock, now is the 3rd one.

PM  EMAIL  GALLERY  Attn:RR  Quote
08-10-2007 10:20 PM  10 years agoPost 13
2Can

rrApprentice

Norway

My Posts: All  Forum  Topic

...out of stock...
...arrive shortly...

The short story of Norwegian hobby shops...

Quando omnitus flunkus moritati (50SE/90SE(sold)/600nPro)/T-Rex 450SE v2

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 769 views
Scorpion Power Scorpion Power
HelicopterAlignOther › Am I going to be a proud owner of a 600N?
 Print TOPIC  Make Suggestion 

 8  Topic Subscribe

Wednesday, November 22 - 1:14 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online