RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 614 views
Scorpion Power Scorpion Power
HelicopterBeginners Corner › HELP!!!!!!
08-08-2007 03:09 AM  10 years agoPost 1
fool4helis

rrNovice

Phoenix, Az.

My Posts: All  Forum  Topic

I just got my new Honey Bee King 2. Everything I've read makes it sound like a great heli but I'm having HUGE problems with the tail on mine...it just wants to spin out of control. I've tried 3 different gyros and the belt tension (to make sure it wasn't slipping...it isn't). The instructions aren't very clear and give no real set up information (yes...I bought the RTF). Can anyone offer any help? I've flown nitro heli's off and on for 15 years, but all this electric stuff is new to me!

Fool

PM  EMAIL  Attn:RR  Quote
08-08-2007 03:17 AM  10 years agoPost 2
R0XoRiZoR

rrVeteran

Austin, Texas - US

My Posts: All  Forum  Topic

Hrm... have you checked to make sure the tail servo is reversed, or needs to be? If you reverse it... i think you have to tell the gyro also...

Just a suggestion... as i rarely know what im doing with mine.. haha

EDIT: woops... 15 years.. i bet you checked that... meh..

PM  EMAIL  GALLERY  Attn:RR  Quote
08-08-2007 03:47 AM  10 years agoPost 3
EvoFlight50

rrApprentice

Southbury, CT

My Posts: All  Forum  Topic

I'm not familiar with that heli but it sounds like your gyro is reversed.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-09-2007 11:32 PM  10 years agoPost 4
garaptor

rrApprentice

Atlanta,Ga,usa

My Posts: All  Forum  Topic

This is a post I did a few days ago maybe you missed. I think it may apply. First of all, check the rudder travel(Is left stick really left?) and gyro direction( Hold the heli with the motor off and twist it suddenly right- is the gyro giving left rudder?) Now...If the rudder and Gyro check out ok, Then you need more rudder. Can you turn off the Gyro?(Switch to Normal mode). Im not familiar with your heli,so youll have to figure out which way to adjust the linkage to get more( right/left) rudder. Adjust your linkage manually,recenter the trim,and try to hover.Not enough? Keep adjusting with the linkage,not the trim switch.When you finally reach the point where it hovers with very little rudder input,turn Heading Hold back on..Dont fly in heading hold with the rudder trim anywhere but in the center because the heli thinks you are telling it to turn.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-12-2007 10:17 PM  10 years agoPost 5
sirchunks29

rrNovice

coventry west​midlands

My Posts: All  Forum  Topic

depends what giro you have maybe you have the rotor speed on spool up too high i have a t rex 450xl

PM  EMAIL  Attn:RR  Quote
08-12-2007 11:50 PM  10 years agoPost 6
tryan02

rrProfessor

Canton, Missouri

My Posts: All  Forum  Topic

try new emeging e-helis group there are setup threads and general discussion about all us who fly the HBK2.

No Really I am the club President!!!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 614 views
Scorpion Power Scorpion Power
HelicopterBeginners Corner › HELP!!!!!!
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Friday, November 24 - 12:21 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online