RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 450 views
Scorpion Power Scorpion Power
HelicopterRadio - Servo - Gyro - Gov - Batt › G7000T/8900G -ALIGN BEC 5.8V....IT'S POSSIBLE????
08-07-2007 09:08 PM  10 years agoPost 1
robi-italy

rrNovice

ITALIA

My Posts: All  Forum  Topic

HELLO TO ALL, I MUST BUY THIS GYRO, AND I ASK YOU IF I CAN USE THIS SYSTEM ....... Can WORK? THANKS AND ASPECT YOUR ANSWERS, ROBERTO

PM  EMAIL  GALLERY  Attn:RR  Quote
08-07-2007 10:10 PM  10 years agoPost 2
DS 8717

rrProfessor

Here wishing i was​somewhere else

My Posts: All  Forum  Topic

The instructions say 4.8 to 5.1 volts only. I know the servo wont take 5.8 volts you need a stepdown for the servo to 5.1 v.

YOU ONLY LIVE ONCE..IF YOU LIVE IT RIGHT THATS ALL YOU NEED

PM  EMAIL  GALLERY  Attn:RR  Quote
08-08-2007 04:50 PM  10 years agoPost 3
robi-italy

rrNovice

ITALIA

My Posts: All  Forum  Topic

hello MR10X ...... in this case if I have understood well the voltage of 4.8 - 5,1 are only reported to the rudder servo, the rest of the gyro would have to accept the 5,8 volt!!! if the situation is this, I insert the step down align (5.1V)between Amplifier and the servo and all would have to work ......... just?
thanks
roberto

PM  EMAIL  GALLERY  Attn:RR  Quote
08-08-2007 04:58 PM  10 years agoPost 4
DS 8717

rrProfessor

Here wishing i was​somewhere else

My Posts: All  Forum  Topic

This is on the instructions for the gyro,there was no servo included. It is not clear if they mean the servo or the amp. I know the servo wont tolerate 5.8 very long,but the amp might.I am using the 5000T and 500t on 5.4 volts with a 8700 servo, and no step down for the servo.I havn'y used the 7000T yet because it's for my Aurora when it arives.DOUG

YOU ONLY LIVE ONCE..IF YOU LIVE IT RIGHT THATS ALL YOU NEED

PM  EMAIL  GALLERY  Attn:RR  Quote
08-08-2007 05:15 PM  10 years agoPost 5
robi-italy

rrNovice

ITALIA

My Posts: All  Forum  Topic

in effects on all sites that I have watched , the servos JR are indicate for use to 4.8/5.1 v (ni/cd)!!!inserting step down the rest of the gyro must not have problems to work with i 5,8 v….
I would not want to arrive to the point to burn all!!!
thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 450 views
Scorpion Power Scorpion Power
HelicopterRadio - Servo - Gyro - Gov - Batt › G7000T/8900G -ALIGN BEC 5.8V....IT'S POSSIBLE????
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Saturday, November 25 - 5:57 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online