RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 829 views
Scorpion Power Scorpion Power
HelicopterFuel-Helicopters New or Limited ActivityGohbee › help ! with clutch problem
08-06-2007 09:28 PM  10 years agoPost 1
hellflyer911

rrNovice

Winter Haven Florida

My Posts: All  Forum  Topic

i am tring to install a evolution 51 in my gohbee 50
that converted from a new 30 kit but when i mount and tighten
down the motor the clutch is sitting 2 deep in the clutch bell stopping it from free spinning
how can i shim it just a hair
any help will be gladly taken thanks
Craig
I AM READY TO FLY

what goes around will come back to you

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
08-06-2007 09:37 PM  10 years agoPost 2
JuanRodriguez

rrProfessor

The Villages,​Florida

My Posts: All  Forum  Topic

I could have sworn that just this moring I read about someone having a similar problem and wound up having to slot the mounting screw holes a bit ??

I think it's in this thread....

http://www.runryder.com/helicopter/...ighlight=gohbee

PM  EMAIL  GALLERY  Attn:RR  Quote
08-06-2007 09:41 PM  10 years agoPost 3
Cambo

rrApprentice

Phoenix, Arizona

My Posts: All  Forum  Topic

Yes, just slot the wholes and it should fit in perfectley. Took me like 5 minutes.

PM  EMAIL  GALLERY  Attn:RR  Quote
08-06-2007 09:49 PM  10 years agoPost 4
hellflyer911

rrNovice

Winter Haven Florida

My Posts: All  Forum  Topic

thanks

WOW THAT WAS A EASY FIX !
but you would think if it is a know issue that would take care of it
i would not like to think that Gohbee or any heli company would try to cut coners on the build and design of there heli's
knowing how much eletronics cost they could be damaged due to a KNOWN ISSUE
well hopefuly i will be out flying tomarrow
thanks for all the input and the fast response wow RR is Great
and for Gohbee just ok
Craig

what goes around will come back to you

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
08-07-2007 02:23 AM  10 years agoPost 5
WJackson

rrElite Veteran

Smyrna, Delaware

My Posts: All  Forum  Topic

Do the Evo motors fit in the Stinger? Thought the head was to big? Or is there a new 51? w/ smaller head?

RIP Roman
Bill Jackson
AlignUSA

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-13-2007 04:08 AM  10 years agoPost 6
FLYINFOOL

rrKey Veteran

Cudahy, WI

My Posts: All  Forum  Topic

I don't know that we ever tried an Evo 50 in the Stinger.
The Stinger was out before the Evo so it was never tested.

I would be curious to here a flight report once you get it broken in, I have never run an Evo engine.


Jeff Borowski
RAMS Club President
www.ramsrcclub.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-13-2007 05:31 AM  10 years agoPost 7
DarkSideSimba

rrVeteran

Alaska

My Posts: All  Forum  Topic

No the Evo52's have mounting issues in all brand helis not just Gohbee..

DSS

Evolution.. Times Have Changed.. Has Your Heli??? Sceadu Evo.. Tomorrows Heli.. Todays Evolution

PM  EMAIL  GALLERY  Attn:RR  Quote
08-13-2007 04:20 PM  10 years agoPost 8
Gohbee

rrApprentice

SC

My Posts: All  Forum  Topic

DSS is correct. The Evolution motor will not fit our airframe as well as a lot of other helicopters. My best advise is to try and return the motor to the hobby shop and purchase an OS 50 Hyper.

-David

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
08-14-2007 10:18 PM  10 years agoPost 9
TYREE

rrVeteran

Sonoma county

My Posts: All  Forum  Topic

I have read .....

a review about the Evolution motors...and it was not very good....

Amongst other things...it was very difficult to tune.
In fact they could not get a good tune on it at all.

Ty

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 829 views
Scorpion Power Scorpion Power
HelicopterFuel-Helicopters New or Limited ActivityGohbee › help ! with clutch problem
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Saturday, November 18 - 8:24 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online