RunRyder RC
 5  Topic Subscribe
WATCH
 1 page 956 views
Scorpion Power Scorpion Power
HelicopterSynergy R/COther › Head Block Seasaw Upgrade
08-06-2007 06:25 PM  10 years agoPost 1
bakofly

rrNovice

Bakersfield, CA USA

My Posts: All  Forum  Topic

Does anyone know where to get the N9 dual bearing upgrade for the seasaw? I have called Ron Lund and Tammies with no luck.

Bakofly

PM  EMAIL  GALLERY  Attn:RR  Quote
08-06-2007 07:47 PM  10 years agoPost 2
Chuckie

rrKey Veteran

Crofton Maryland

My Posts: All  Forum  Topic

All you need is two 4x8x3mm bearings and two button head screws cut to the right length. I grinded mine down to 9mm length, I think, but if you grind yours just remove the flybar and install everything (including the two factory 4mm washers), then look to see how far the screws are into the seesaw and grind them down to the length needed to clear the flybar. You could also use a 4x8x4mm bearing with 10mm screws. Check RR font page for RC-Bearings.com and they should have the bearing you need.

Charles

Please stand by for faster service!

PM  EMAIL  GALLERY  Attn:RR  Quote
08-09-2007 07:15 PM  10 years agoPost 3
rspblake

rrApprentice

London uk. coulsdon

My Posts: All  Forum  Topic

Try 108-483 which is the 4x8x3 part number

(gunnell_s) still owes me money! ... web evorc.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-09-2007 08:19 PM  10 years agoPost 4
Awamori

rrApprentice

Minot, ND

My Posts: All  Forum  Topic

What does this mod do exactly? Does anyone have any pictures of a before and after? I'm having a hard time seeing where and what this mod does. Thanks in advance....

PM  EMAIL  GALLERY  Attn:RR  Quote
08-09-2007 08:43 PM  10 years agoPost 5
raptorheli2

rrElite Veteran

rip off britain and​no changing it

My Posts: All  Forum  Topic

the bearing goes in the headblock where the bolts go through into the seesaw.

2 sec mod, buy bearings and bolts and push in...job done.

cheers


www.waterfoothelis.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-09-2007 10:39 PM  10 years agoPost 6
Harts

rrApprentice

Victoria, Australia

My Posts: All  Forum  Topic

I used some bearings from Align, they are the right size and come in a 4 pack.

PM  EMAIL  Attn:RR  Quote
08-10-2007 01:17 AM  10 years agoPost 7
bakofly

rrNovice

Bakersfield, CA USA

My Posts: All  Forum  Topic

Thanks guys for the replys.

I have about 150 flights on my N9 and now the seasaw has a significant amout of play/slop. From my understanding the bearing is to help with the load and to eliminate any play. Does anyone know if that is correct? When I first built the N9 it did not have any play in the seasaw.

Bakofly

PM  EMAIL  GALLERY  Attn:RR  Quote
08-10-2007 11:11 AM  10 years agoPost 8
Saleh

rrVeteran

Kuwait

My Posts: All  Forum  Topic

Does any1 have pics for the mod?

If you aint crashing you aint flyin

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-10-2007 01:34 PM  10 years agoPost 9
Harts

rrApprentice

Victoria, Australia

My Posts: All  Forum  Topic

Synergy Rc site has the update pages for the manual on it showing how to assemble if that helps at all.

PM  EMAIL  Attn:RR  Quote
08-11-2007 02:33 AM  10 years agoPost 10
Torkroll

rrApprentice

Bakersfield Ca

My Posts: All  Forum  Topic

Racers haven or T & T probably have 4 X 8 X 3 bearings.

Bearings for a car or any heli ...

Anyone who says it's a small world never tried to walk to Zimbabwe.
Jerry

PM  EMAIL  GALLERY  Attn:RR  Quote
08-11-2007 07:42 AM  10 years agoPost 11
Awamori

rrApprentice

Minot, ND

My Posts: All  Forum  Topic

Still would like some pictures or at least a 6th grade diagram. I went to the Synergy website and still don't get it. Guess I'm a slow learner....nothing new really but I'm definately a picture person.

PM  EMAIL  GALLERY  Attn:RR  Quote
08-11-2007 09:18 AM  10 years agoPost 12
ecosse2253

rrApprentice

n.ireland

My Posts: All  Forum  Topic

http://www.synergyrc.com/en/images/...s/a18_rev_1.pdf
heres the link to the diagram

www.westonuk.co.uk compass field rep uk and ireland

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 956 views
Scorpion Power Scorpion Power
HelicopterSynergy R/COther › Head Block Seasaw Upgrade
 Print TOPIC  Make Suggestion 

 5  Topic Subscribe

Saturday, November 18 - 12:26 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online