RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 387 views
HelicopterRadio - Servo - Gyro - Gov - Batt › 401 mechanical setup Q?
01-28-2007 09:41 AM  10 years agoPost 1
andythilo

rrApprentice

Saffron Walden, Essex, UK

My Posts: All  Forum  Topic

Just checking through my tail setup etc..

Decided to read through here and see what people recommend mech wise for the 401 and specifically the R50.

Now it's said that the servo ball should be the correct distance so that when you give full right rudder and pull the link rod forward, AND the limit pot is set to 100 the ball link will snap on the ball.

Now at the moment I have the limit set to 120 to get this and 13mm on the arm. In order to get 100 I need a 17.5mm distance.

Is this right?, whats better 100 limit and 17.5mm or 120 limit and 13mm.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-28-2007 02:04 PM  10 years agoPost 2
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

16 or 17mm is about right.

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR  Quote
01-28-2007 03:11 PM  10 years agoPost 3
andythilo

rrApprentice

Saffron Walden, Essex, UK

My Posts: All  Forum  Topic

OK thanks, i'll use that when I get it back from it's service.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 387 views
HelicopterRadio - Servo - Gyro - Gov - Batt › 401 mechanical setup Q?
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Tuesday, December 12 - 8:33 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online