RunRyder RC
 6  Topic Subscribe
WATCH
 3 pages [ <<    <    ( 1 )     2      3     NEXT    >> ] 6840 views
01-26-2007 12:25 PM  10 years agoPost 1
Dave Wilshere

rrNovice

Hertfordshire

My Posts: All  Forum  Topic

Guys

Thought I would jump in with our first Razor 600E to fly in England/maybe Europe!
We are putting two together one with Hacker A50 14s/10s Thunderpower "hot" set up.
The other is going to be our test vehicle for motors etc and reading/looking at other cheaper set ups I noticed that the T-Rex 600 motor speedo is a nice price and seems to work...so find a ratio 18.46:1 and bingo a cheap 6s set up.
I thought this would be good for "hovers" and simple aeros but in the two test flights we have just completed it 3-Ds pretty well.
Didn't take a tacho so I don't know the headspeed but I'm guessing 1900ish on 60cm SAB's
More info as we test this weekend.

Dave Wilshere

PM  EMAIL  Attn:RR  Quote
01-26-2007 01:13 PM  10 years agoPost 2
blakka_1

rrElite Veteran

London/Enfield

My Posts: All  Forum  Topic

Nice.

PM  EMAIL  Attn:RR  Quote
01-26-2007 04:53 PM  10 years agoPost 3
3D Heli Ireland

rrVeteran

Ireland

My Posts: All  Forum  Topic

Not long to go myself Dave until I am up and ready. This week maybe.

Skookum Robotics,Sav�x, Motors and Servos,Optipower,SwitchGlo,CML st

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-27-2007 02:00 AM  10 years agoPost 4
busted blade

rrApprentice

orlando,florida

My Posts: All  Forum  Topic

one day we'll get canopies

bling bling, cha ching......... but honey

PM  EMAIL  GALLERY  Attn:RR  Quote
01-27-2007 02:08 AM  10 years agoPost 5
VKGT

rrElite Veteran

Sanford, NC

My Posts: All  Forum  Topic

Nice!!

PM  EMAIL  GALLERY  Attn:RR  Quote
01-29-2007 01:23 PM  10 years agoPost 6
Dave Wilshere

rrNovice

Hertfordshire

My Posts: All  Forum  Topic

Guys

I grafted an old X-cell 30/46 Graphite glass canopy on while we wait for Razor canopies.
2nd model is complete with a Hacker set up and will fly when the speedo arrives!

Dave Wilshere

PM  EMAIL  Attn:RR  Quote
01-30-2007 08:43 AM  10 years agoPost 7
misskimo

rrElite Veteran

Alaska 17 years, before mississippi for 31y

My Posts: All  Forum  Topic

hey , well my Razor ready with its canopy , had the Ion painted kinda like it too , 800 mm 3Dier , yeh!!

PM  EMAIL  GALLERY  Attn:RR  Quote
01-30-2007 01:08 PM  10 years agoPost 8
3D Heli Ireland

rrVeteran

Ireland

My Posts: All  Forum  Topic

Misskimo

Is that a Lexan canopy or the normal fibreglass??

Skookum Robotics,Sav�x, Motors and Servos,Optipower,SwitchGlo,CML st

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-30-2007 05:04 PM  10 years agoPost 9
misskimo

rrElite Veteran

Alaska 17 years, before mississippi for 31y

My Posts: All  Forum  Topic

hey , its glass , I havent recieved a plastic one yet , painted, it weighs 5 oz , not bad in weight,
3 oz would be great

PM  EMAIL  GALLERY  Attn:RR  Quote
02-03-2007 07:28 PM  10 years agoPost 10
3D Heli Ireland

rrVeteran

Ireland

My Posts: All  Forum  Topic

Just got my Razor up and running today......Wow

Nuff said...........

Vids and pics to follow soon.

Skookum Robotics,Sav�x, Motors and Servos,Optipower,SwitchGlo,CML st

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-06-2007 12:24 AM  10 years agoPost 11
OICU812

rrMaster

Edson, Alberta, Canada

My Posts: All  Forum  Topic

3D Heli Ireland, I look forward to your videos.

...Once upon a time there were Nitros, flybars and frequency pins...

PM  EMAIL  GALLERY  Attn:RR  Quote
02-06-2007 10:36 AM  10 years agoPost 12
3D Heli Ireland

rrVeteran

Ireland

My Posts: All  Forum  Topic

I was going to take one on Sunday morning but it was -4 degrees and very foggy. I flew anyway but it wouldn't have made a good vid. When I landed the blades were covered in ice!! Not good...Vids to come soon

Skookum Robotics,Sav�x, Motors and Servos,Optipower,SwitchGlo,CML st

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-09-2007 09:18 AM  10 years agoPost 13
TURBINE MASTER

rrApprentice

SW ENGLAND

My Posts: All  Forum  Topic

razor 600e

Hi All
Kit arrived this week excellent quality as expected from miniature aircraft awaiting ratio kit to get it in the air keep up the good work
Turbine Master

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-15-2007 04:15 PM  10 years agoPost 14
Dave Wilshere

rrNovice

Hertfordshire

My Posts: All  Forum  Topic

Ok

I have been flying our second razor fitted with a Hacker A50 and 10s Thunderpower 3850's...rock and roll!

Performance is fantastic, three flights so far and a little more setting up should have it fully dialled in

Dave Wilshere

PM  EMAIL  Attn:RR  Quote
02-15-2007 06:29 PM  10 years agoPost 15
misskimo

rrElite Veteran

Alaska 17 years, before mississippi for 31y

My Posts: All  Forum  Topic

Dave , did you get the short packs of the 3850s , about the same lenth as the evos , if you got the long packs , they are good too , 22C , shourt packs are 25C though, and they are Bad to the bone

PM  EMAIL  GALLERY  Attn:RR  Quote
02-15-2007 08:24 PM  10 years agoPost 16
misskimo

rrElite Veteran

Alaska 17 years, before mississippi for 31y

My Posts: All  Forum  Topic

heres a short video of a test I did after the vegas event , not recomended though , too much power he he , weight was a tad heavy too since I used 12s 3850s , 12s 3300 work great , need to tinker with it some more http://runryder.com/helicopter/gall...hunderPower.zip

PM  EMAIL  GALLERY  Attn:RR  Quote
02-15-2007 10:10 PM  10 years agoPost 17
rcman

rrKey Veteran

Logan, Utah

My Posts: All  Forum  Topic

Tony, you HV man, looks pretty good
David

PM  EMAIL  GALLERY  Attn:RR  Quote
02-16-2007 02:41 AM  10 years agoPost 18
Chuck Bole

rrElite Veteran

Tulsa Ok. U.S.A.

My Posts: All  Forum  Topic

hey Tony
ha more power!! grunt grunt!
lookin good man.
chuck

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-16-2007 01:03 PM  10 years agoPost 19
stanc

rrKey Veteran

Conroe, TX

My Posts: All  Forum  Topic

hey , its glass , I havent recieved a plastic one yet , painted, it weighs 5 oz , not bad in weight,
3 oz would be great
Hey Tony, the Canopies are not plastic, they are FB.

Stan

Stan
2- Logo 500
Ion X2
eAvro90

PM  EMAIL  GALLERY  Attn:RR  Quote
02-16-2007 05:19 PM  10 years agoPost 20
misskimo

rrElite Veteran

Alaska 17 years, before mississippi for 31y

My Posts: All  Forum  Topic

Hey , Stan , YEH! its glass , fiberglass , the plastic one is a aftermarket one ,
still ugly , but not to bad , I do like the Ion canopy better , to bad they didnt make a smaller canopy like the fury
Chuck , and rcman , YEH!

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 3 pages [ <<    <    ( 1 )     2      3     NEXT    >> ] 6840 views
 Print TOPIC  Make Suggestion 

 6  Topic Subscribe

Tuesday, December 12 - 11:46 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online