RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 359 views
Helicopter
e-
Blade
Other › trouble with aleiron cp pro
01-25-2007 03:16 AM  10 years agoPost 1
fenix

rrNovice

Mexico

My Posts: All  Forum  Topic

as i say i´m new to the helis and maybe the way i explain could be funny or weird but here it is ..
after do the before fly check list everything looks fine but when i apply the trothle gradually and still in the ground (i can´t fly yet) the heli roll to the right side viewing from tail, i need to move the right trim the one under the right stick all to the left and heli keep stable..
What can i do ? is there any linkages to adjust ..
thanks in advance..

PM  EMAIL  Attn:RR  Quote
01-25-2007 04:47 AM  10 years agoPost 2
Gino CP

rrKey Veteran

Philippines

My Posts: All  Forum  Topic

Look at bladecprepair.com on how to adjust the swashplate. It should be level. Rotor head must be centered on the hub after adjusting the swashplate. Then adjust pitch and tracking.

In summary:

1. Adjust servo links so that the swash plate is level relative to the main gear. Adjust it so that the rotor head is in the middle of the hub (part it slides on).

2. When swash plate is level, the head may have moved. That changes the pitch. Adjust pitch using the long link from the swash to the bell-hiller arm so that you get zero pitch at throttle min.

3. Now weigh down heli and spin up. View blades from the side. The blades must look like one. If they split in two, increase pitch on low blade.

PM  EMAIL  Attn:RR  Quote
01-25-2007 06:40 AM  10 years agoPost 3
fenix

rrNovice

Mexico

My Posts: All  Forum  Topic

thanks i'll try this .
a few guys told me to adjust the aileron ..
i'll try both things .
thanks a lot

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 359 views
Helicopter
e-
Blade
Other › trouble with aleiron cp pro
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Sunday, December 17 - 7:45 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online