RunRyder RC
 0  Topic Subscribe
WATCH
 1 page 478 views
Helicopter
e-
Align
Other › MH Head Block Question????
01-25-2007 02:59 AM  10 years agoPost 1
Jon the Rooster

rrElite Veteran

Johns Island, Charleston, SC

My Posts: All  Forum  Topic

Just got me a MH head block, I'm using the red dampners & realize I have alot of slop!????
Do I need to use the metal rings & 1 O-ring on each side or what, I'm confused why it's not as stiff with the red guys???
Anyone have a similar issue on initial set up that can help me out??

and one more thing "DON'T BE AFRAID!"

PM  EMAIL  GALLERY  Attn:RR  Quote
01-25-2007 11:59 AM  10 years agoPost 2
Jon the Rooster

rrElite Veteran

Johns Island, Charleston, SC

My Posts: All  Forum  Topic

Com on guy's! Don't make me figure out this one on my own!
Does anybody use the MH Headblock?????????????

and one more thing "DON'T BE AFRAID!"

PM  EMAIL  GALLERY  Attn:RR  Quote
01-25-2007 02:38 PM  10 years agoPost 3
lowflyer101

rrKey Veteran

garden grove, CA

My Posts: All  Forum  Topic

i don't about red damper, but on mH hub i need to using a align thicker spacer or 2 stock oem spacer on each side. other wise it too loose for 3d. the mH O ring that come with hub and grip combo is bigger than thicker and align.

<-freedoom flyer->

PM  EMAIL  GALLERY  Attn:RR  Quote
01-25-2007 04:57 PM  10 years agoPost 4
Jon the Rooster

rrElite Veteran

Johns Island, Charleston, SC

My Posts: All  Forum  Topic

Thanks, I guess I'll have to fiddle with it when I get home.

and one more thing "DON'T BE AFRAID!"

PM  EMAIL  GALLERY  Attn:RR  Quote
01-27-2007 01:43 PM  10 years agoPost 5
Jon the Rooster

rrElite Veteran

Johns Island, Charleston, SC

My Posts: All  Forum  Topic

Well I got it figured out. Ended up using the old bushings I poped out from my old align see saw, when trying to do the bearing mod, witch didn't work cause the hole was no longer centered!
So, tried them in a last ditch effort to use this bling Head & and Walla! Perfect & still using the Red Dampners too.
I modified the new washout base by fileing down the uper brass sleve to get more movement because of the longer head, I guess.
Had to use 2 bearings ( old plastic mixing arms ) as spacers to use my MH uper mixing arms becasue I like the extra pitch range that is now +13/-14 Had to extend the ballinks on the flybar arms to, but now shes done! Can't wait to fly her today!

Note to self: No Dumb Thumbs Today,No Dumb Thumbs Today,No Dumb Thumbs Today,No Dumb Thumbs Today,No Dumb Thumbs Today,No Dumb Thumbs Today,No Dumb Thumbs Today,No Dumb Thumbs Today,No Dumb Thumbs Today,No Dumb Thumbs Today,No Dumb Thumbs Today,No Dumb Thumbs Today,No Dumb Thumbs Today,No Dumb Thumbs Today,No Dumb Thumbs Today !!!!

and one more thing "DON'T BE AFRAID!"

PM  EMAIL  GALLERY  Attn:RR  Quote
01-27-2007 10:07 PM  10 years agoPost 6
Jon the Rooster

rrElite Veteran

Johns Island, Charleston, SC

My Posts: All  Forum  Topic

Damit!!! Head Dampning is too much, she shakes so bad on start up & spool down I'm just ask'n for a Tip Over! Back to the drawing board!!
Flying around & climbout's are Great Tho!!
I guess the dampning can be too stiff!

and one more thing "DON'T BE AFRAID!"

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 478 views
Helicopter
e-
Align
Other › MH Head Block Question????
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Monday, December 18 - 6:39 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online