RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 867 views
HelicopterAvant RC Avant Aurora - Mostro › Avant EFX engine removal
01-24-2007 11:08 PM  10 years agoPost 1
SolarXtreme

rrVeteran

Arroyo Grande, CA

My Posts: All  Forum  Topic

Hey guys while doing some initial testing of my new OS 91 SZH (pumped) I have a feeling I am going to want to run both the #1 and #2 shims in the head. I want to be able to evaluate both setups at the field without having to completly remove the engine mounts, side stiffiners etc. As it is I had to shoe horn this big monster into the Avant frame. My YS dropped out without much effort but can't figure out how to remove this big sucker. Is there a technique for removing the OS91 SZH without excessive teardown to the ship?

I picked a hell of a day to quit drinking

Avant EFX
Freya EVO

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-25-2007 05:03 AM  10 years agoPost 2
MEDFLIGHT

rrVeteran

South Webster, Ohio

My Posts: All  Forum  Topic

On the right side I removed the stiffener, engine mount to frame bolts and the tab that holds the shroud. On the left side I removed the muffler and engine to engine mount bolts. Then I removed the shroud. I then took the bolts out of the bearing block below the starter coupler. All this gave me enough movement to turn the engine head out the right side so I could add shims. It's about the easiest way I could come up with. A cordless drill with cut off allen drivers is quick for removing and running down screws but don't try to break torque or torque them down with it. I loosen them all by hand, remove them with the drill, then get them startd by hand, run them almost all the way in with the drill, then tighten by hand.

PM  EMAIL  Attn:RR  Quote
02-10-2007 05:59 PM  10 years agoPost 3
IDHoverman

rrApprentice

Jakarta-Indonesia

My Posts: All  Forum  Topic

Medflight, what engine are you using? I have been trying your method to no avail, YS engine or anything with viper head may not be a problem, but the OS with those big round head is really an issue for me, still can not master on how to even rotate that 'big blue head'engine from the initial position (parallel to the side frames).

PM  EMAIL  Attn:RR  Quote
02-10-2007 07:09 PM  10 years agoPost 4
MEDFLIGHT

rrVeteran

South Webster, Ohio

My Posts: All  Forum  Topic

I'm using an umpumped SZ in an efx. I had enough room to easily turn the engine sideways so I could remove the the head to install shims.

PM  EMAIL  Attn:RR  Quote
02-18-2007 11:11 PM  10 years agoPost 5
z11355

rrMaster

New England

My Posts: All  Forum  Topic

You can do the rotation w/ the OS91SZH only if you remove the
engine mount center section.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2007 11:18 PM  10 years agoPost 6
MEDFLIGHT

rrVeteran

South Webster, Ohio

My Posts: All  Forum  Topic

I never moved the center section.

PM  EMAIL  Attn:RR  Quote
02-19-2007 04:39 AM  10 years agoPost 7
IDHoverman

rrApprentice

Jakarta-Indonesia

My Posts: All  Forum  Topic

Medflight, next time you do that, please take pictures and share it with us, I still can not figure out how to do that magic move. Maybe Augusto wants to chip in? Videos would be nice

PM  EMAIL  Attn:RR  Quote
02-19-2007 02:26 PM  10 years agoPost 8
MEDFLIGHT

rrVeteran

South Webster, Ohio

My Posts: All  Forum  Topic

Can't do video but I will take some pics.

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 867 views
HelicopterAvant RC Avant Aurora - Mostro › Avant EFX engine removal
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Wednesday, December 13 - 9:27 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online