Vaughan, Ontario, Canada
My Posts: All Forum Topic
I am quite new in heli flying and am still in the side-in hovering stage. Lately I tried to set up my 450xl to go full -11 to +11 as I always heard but found all I could get was -8 to +7. The travel setting in my 7202 are at 150 both up and down. Is there any setting I may have missed or incorrectly adjusted? I am using the Align 420 motor and 25A esc, JR 790 rx on an external bec, DS285x3 for clyclic, GY401 with 9650 for the tail. The only solution I can think of is to use a longer servo arm but that will be rubbing the canopy for sure. Please help.