RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 507 views
HelicopterEngines Plugs Mufflers Fuel › OS50 Hyper Muffler
01-23-2007 08:56 AM  10 years agoPost 1
MolokaiBoy

rrKey Veteran

Lahaina, Maui,Hawaii USA

My Posts: All  Forum  Topic

ok guys what muffler do you recommend for a Titan and OS50 Hyper??

links to web where i can purchase would also be helpful

Thanks

Les
Maui RC Modeler's, Big Island RC Helis, http://www.facebook.com/mauirc

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
01-23-2007 09:00 AM  10 years agoPost 2
jadams

rrKey Veteran

East coast USA

My Posts: All  Forum  Topic

Well worn topic, you should try a search....but most will say either the MPII or the Hatori JK SB-50. you can buy from any of the advertisers on the home page. GrandRC has the SB-50 for $109 shipped.

PM  EMAIL  GALLERY  Attn:RR
01-23-2007 03:32 PM  10 years agoPost 3
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

MP2 if you want to get max power and run it at 17K all the time.

SB50 if you want quieter, smooth at lower RPMS and nearly as much power. Downside is it costs more.

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR
01-23-2007 10:47 PM  10 years agoPost 4
StillTryin

rrApprentice

Perth, Western Australia

My Posts: All  Forum  Topic

And don't forget that the supplied muffler does a pretty reasonable job unless you are after that last 10 - 15%

PM  EMAIL  Attn:RR
01-24-2007 02:58 AM  10 years agoPost 5
Raptorz499

rrKey Veteran

NJ

My Posts: All  Forum  Topic

Just tried the MP2 pipe today for the first time on my 50SE with the Hyper motor and it is great!!

PM  EMAIL  GALLERY  Attn:RR
01-24-2007 03:55 AM  10 years agoPost 6
turboomni

rrProfessor

East of the Equator

My Posts: All  Forum  Topic

And don't forget that the supplied muffler does a pretty reasonable job unless you are after that last 10 - 15%
I agree. Unless you're running for all out max power with 2000 headspeed+30% nitro and doing hard 3D moves. The Titan has plastic head correct? So anything much over 1900 headspeed is not recommended. Are you doing hard 3D? I ask because your other heli is a Blade CP. With the stock muffler you can do most stuff with ease at a lower headspeed between 1800 and 1900 . If you run high
headspeed with a metal head then the stock muffler does not have the flow to let the Hyper breath. Lower rpm's than that should be fine. It depends on how hard you run the heli. Don't spend money unless you have to and spend it on fuel.

Setup is everything, All my heli's can fly far better than I can pilot them

PM  EMAIL  GALLERY  Attn:RR
01-24-2007 06:03 AM  10 years agoPost 7
Tioli

rrVeteran

Kona, Hawaii

My Posts: All  Forum  Topic

His other heli IS a Blade CP, but you should see him wring it out!

PM  EMAIL  GALLERY  Attn:RR
01-24-2007 06:10 AM  10 years agoPost 8
MolokaiBoy

rrKey Veteran

Lahaina, Maui,Hawaii USA

My Posts: All  Forum  Topic

hard 3d

no not into the hard 3d just yet
guess ill try the stock muffler for now and get the MP2 in a little bit thanks for all the help

Les
Maui RC Modeler's, Big Island RC Helis, http://www.facebook.com/mauirc

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
WATCH
 1 page 507 views
HelicopterEngines Plugs Mufflers Fuel › OS50 Hyper Muffler
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Friday, December 15 - 12:04 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online