RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 538 views
HelicopterComputer Flight SimulatorsReflex › Reflex Xtr problem
01-23-2007 07:14 AM  10 years agoPost 1
Emaxxer101

rrNovice

torrance, ca

My Posts: All  Forum  Topic

Hi, I just recently got Reflex and I am having trouble flying the helicopters in the simulator. The tail seems to speed up when i increase the pitch or throttle which makes it very hard to control the heli. I have configured the center of all my sticks and have sets the channels correctly. Everything else works fine except this. Also, when I fly inverted, the tail begins to spin even more so that it is just too hard to fly inverted. If this helps at all my transmitter is the T6XHs by futaba. Also should I have my transmitter in heli mode or airplane mode and should I have it in PCM or PPM?

thanks

Kevin

PM  EMAIL  Attn:RR  Quote
01-23-2007 07:39 AM  10 years agoPost 2
Nightstalker

rrElite Veteran

UK (BEDFORDSHIRE)

My Posts: All  Forum  Topic

Also should I have my transmitter in heli mode or airplane mode and should I have it in PCM or PPM?
im not sure what else could be wrong, but if u have it set to plane and when on the sim then that will be your problem, you need to set it up like a real model heli

PM  EMAIL  Attn:RR  Quote
01-23-2007 03:31 PM  10 years agoPost 3
Carbonizer

rrNovice

Amsterdam/the Netherlands/europe

My Posts: All  Forum  Topic

REVO mix off pls.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-23-2007 04:24 PM  10 years agoPost 4
pH7

rrKey Veteran

Sterling Heights, MI - USA

My Posts: All  Forum  Topic

Reflex will not work if you have it in PCM mode, you must be in PPM. I agree that REVO mix is your likely culprit for the tail moving with pitch changes.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-23-2007 06:34 PM  10 years agoPost 5
Nightstalker

rrElite Veteran

UK (BEDFORDSHIRE)

My Posts: All  Forum  Topic

EDIT..

PM  EMAIL  Attn:RR  Quote
01-23-2007 07:40 PM  10 years agoPost 6
Reflex Products

rrVeteran

Elmshorn, Germany

My Posts: All  Forum  Topic

As Carbonizer: Revo mixing pff please PLUS check your gyro sensitivity setting. Most probably you will be using a helicopter having a piezo integral gyro. Check F1 for help on the settings. At 0% (centered), this setting is useless. Please use your input channel to set something like +/- 70-80%, depending on your flying style.

If you would be running Reflex on PCM you would get a crasy uncontrollable model on the screen and most probably you will have a "turn your tx on"-message prior start.

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
WATCH
 1 page 538 views
HelicopterComputer Flight SimulatorsReflex › Reflex Xtr problem
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Monday, December 11 - 11:32 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online