RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 497 views
HelicopterMain Discussion › let's talk about C.G.
01-22-2007 06:10 AM  10 years agoPost 1
crash-

rrVeteran

Ca

My Posts: All  Forum  Topic

Were is your CG at and how it fly?

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-22-2007 07:03 AM  10 years agoPost 2
jadams

rrKey Veteran

East coast USA

My Posts: All  Forum  Topic

Mines in the Center....

PM  EMAIL  GALLERY  Attn:RR  Quote
01-22-2007 07:13 AM  10 years agoPost 3
Dood

rrProfessor

Wescanson

My Posts: All  Forum  Topic

My CG is almost right at the trailing edge of one of my flybar paddles. It flies lousy. It used to be at the tail hub, but I fixed it. It flew pretty lousy there, too.

  ▲
▲ ▲

PM  EMAIL  GALLERY  Attn:RR  Quote
01-22-2007 12:39 PM  10 years agoPost 4
AV8TOR

rrVeteran

Fort Worth, TX

My Posts: All  Forum  Topic

Very slight nose down for me

PM  EMAIL  GALLERY  Attn:RR  Quote
01-22-2007 01:05 PM  10 years agoPost 5
eyeflyhelis

rrElite Veteran

charlotte nc

My Posts: All  Forum  Topic

if your flying 3d you want it center of the flybar. at the most the front of the paddles. weight to the tail makes for bad flying characteristics most noticeable in turns because you need to put so much more input into it and it will try to stop in a turn- wont fly through it smoothly

only you have the power to make no difference!

PM  EMAIL  GALLERY  Attn:RR  Quote
01-22-2007 03:20 PM  10 years agoPost 6
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

Right on the main shaft or very slightly nose down. If your CG is right your trim wont change when its upright or inverted.

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 497 views
HelicopterMain Discussion › let's talk about C.G.
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Thursday, December 14 - 1:19 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online