RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 662 views POST REPLY
Helicopter
e-
Mikado
Other › Logo 103D and standard Logo 10
11-27-2006 12:27 AM  11 years agoPost 1
kelegba

rrNovice

Angers, France

My Posts: All  Forum  Topic

hello,
can you please tell me the differnce between standard Logo 10 and the Logo 103D????
can upgrade my Logo to the 3d one??
I use reflex Logo3D and I feel it very stable and smooth, is somebody
know the setup of this Logo? can get the same setup with my "real" standard Logo ..
thank you for your help!

PM  EMAIL  GALLERY  Attn:RR  Quote
11-27-2006 02:31 AM  11 years agoPost 2
lowflyer101

rrKey Veteran

garden grove, CA

My Posts: All  Forum  Topic

yes you can get the logo 10 and upgrade it to logo 10 3d later ..

<-freedoom flyer->

PM  EMAIL  GALLERY  Attn:RR  Quote
11-27-2006 01:52 PM  11 years agoPost 3
Lorents

rrElite Veteran

Oslo, Norway

My Posts: All  Forum  Topic

Hi,

I dont know what the standard kit contains, but if you are considering the Deluxe kit vs the 3D kit I would go for the 3D kit.

The 3D kit comes with CF blades, ball bearings in seesaw + mixer arms, tail control forks with hinges, steel spindle, harder dampeners, dual tail boom supports, alu swash and lots of smaller bits that are nice to have

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-27-2006 03:25 PM  11 years agoPost 4
comet

rrVeteran

Neuilly sur Seine, Fr

My Posts: All  Forum  Topic

as I understood, Kelegba already has a Deluxe kit.

yes, get 3D upgrades, especially metal swashplate+bearings, as for power, Tango10 on 6S and you should drop your sim.

if you still didn't get a tray, get one too

VT "slow&low"

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-27-2006 04:52 PM  11 years agoPost 5
caseyjholmes

rrElite Veteran

Portland, Oregon

My Posts: All  Forum  Topic

I don't know if they changed the original logo 10 base kit, but the one I had, the flybar paddles would rotate in the crappy seesaw. I tried a flip and the paddles turned sideways! Luckly, I was able to land after the flip came within inches of the ground. When I got my first logo 10 3D, it came with better bolts for the seesaw bridge.

I would not recomend trying the standard logo 10 for 3D, as the upgraded seesaw bolts are a must, as well as dampeners, swash and a few ball bearing raced parts. It would be a good idea to upgrade your standard Logo 10 before attempting any 3D with it. I came within inches of crashing the crud out of my standard logo 10 because the flybar rotated the paddles 90* sideways.

Ever seen a heli fly with paddles sideways!?
One thing is for sure, cyclic response is practically non existant!

PM  EMAIL  GALLERY  Attn:RR  Quote
11-27-2006 08:03 PM  11 years agoPost 6
kelegba

rrNovice

Angers, France

My Posts: All  Forum  Topic

thanks for your help, can I use 3d paddle with shorter flybar (300mm)???

PM  EMAIL  GALLERY  Attn:RR  Quote
11-27-2006 08:51 PM  11 years agoPost 7
LogoHeli

rrVeteran

Brisbane, Queensland, Australia

My Posts: All  Forum  Topic

Yes you can. If you want really stable flying, use heavier paddles ( the solid ones, 3mm), the 300mm fly bar, and a low head speed

heli+ground/heli+tree/heli+bush=not good

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 662 views POST REPLY
Helicopter
e-
Mikado
Other › Logo 103D and standard Logo 10
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Thursday, January 18 - 8:01 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online