Has anyone else had a problem with the BEC that comes with the Trex 600? I just finished building mine and was installing all of the electronic, I connected the servos to the reciever and BEC then the 7.4 volt Lipo that came with it.
When I turned the power on using the little power switch the light came on indicating a fully charged battery but the servos wouldn't move. I turned off the BEC and disconnected it from the reciever checked my servo connection and tried again. This time there still was no servo movement, the BEC was on but felt like it was getting a little warm so I turned it off.
Rechecked everything was connected correctly again and turn the BEC back on. Nothing this time no lights or anything. I Removed it from the reciever and tried the set up with an old reciever battery and everything started twitching just like I would expect.
Did I just get a bum BEC or has there been others with problems? The only things I had connected were the 4 servos and the reciever.
Another one bites the dust...