RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 434 views POST REPLY
ProModeler Scorpion Power
Helicopter
e-
Electric General Discussion
› CC25/park 400/cuts
03-12-2006 11:38 AM  11 years agoPost 1
parksi

rrApprentice

England

My Posts: All  Forum  Topic

Hiya chaps.
sorry for the lenght of post lol.I am using the cc25 with the park 400 brushless and i am gettin motor cutout even with fresh charged Align 1900mah 13c lipoly.i have 2 recivers running on this model.1 reciever futaba 138 running the motor only and have a protech micro reciever running 4 servo's and a flat 4.8v battery powering that.and still the motor cuts.i tried this steup because i was getting cutouts when i was using 1 reciever for everything (normal way) i tried to by-pass the bec by running 2 reciever's because i thought the speed contoller was not up to the job.but as i say it still cuts out.what gives..so i wonder is the CC25 good enough to run this motor 3700Kv park 400.a guy at the LHS says that the park 400 runs about 22 amps constantly and says the esc is at it limits.i now want to remove the power signals from the RX lead coming from the esc and still have power to the reciever.i know i need to keep the signal wire.i tried last night i removed the brown and red wire from the plug and the red led kept flashing with no power to motor.i tried plugging the 4.8flat pack to power the reciever but still no good.am i chasing a lost cause or should this motor work on the cc25 without problems?? any ideas
Thanks guys
Parksi

PM  EMAIL  Attn:RR
03-13-2006 04:56 PM  11 years agoPost 2
parksi

rrApprentice

England

My Posts: All  Forum  Topic

hiya chaps..well maybe some one runs the park 400 3700kv with a CC25 esc ..i am running the align 1900mah 13c lipoly.low cut off setting 7v softest start.i am waiting for the align esc 35 amp 6v bec..some one any 1 please help..cheers
parksi

PM  EMAIL  Attn:RR
WATCH
 1 page 434 views POST REPLY
ProModeler Scorpion Power
Helicopter
e-
Electric General Discussion
› CC25/park 400/cuts
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Thursday, August 24 - 7:51 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online