RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 439 views POST REPLY
ProModeler Scorpion Power
HelicopterRadio - Servo - Gyro - Gov - Batt › CSM 360 for scale bell
03-10-2006 10:34 PM  11 years agoPost 1
Inferno666

Heliman

My Posts: All  Forum  Topic

Hi,


I've bought a 2nd hand csm360 for my bell 230. It has a 9203 on the tail. The gain is on 50 % like factory default but the tail wags very hard and the helicopter has ground resonance because of the gyro settings. I had a Gy501 on it but that gyro is on another helicopter now. With the GY501 it was stable.
What are good parameters for this combination ?


Thx and greetings Joris

PM  EMAIL  Attn:RR
03-12-2006 07:23 PM  11 years agoPost 2
Inferno666

Heliman

My Posts: All  Forum  Topic

no replies...

PM  EMAIL  Attn:RR
03-12-2006 10:21 PM  11 years agoPost 3
Eury

rrProfessor

Dover NH

My Posts: All  Forum  Topic

Well, you're not talking about a real common setup. It's kinda funny, I was going through all the stuff I had left at my parents' house through the years in storage in their barn this week, and found the manual to the CSM 360. I threw it away, but still, kinda funny.

http://www.rchelibase.com/gyro/360man.pdf

There's a link to the manual, go through it and set the gyro and servo up. It's been years since I had one, but as I recall, there wasn't anything too difficult about it. It certainly doesn't hold as well as the 501, but it's a decent gyro. On tail wagging, it's the same as every other gyro. If it's wagging turn the gain down until it stops, assuming everything else is set properly. The only thing that stands out in my mind was that the 360 was pretty sensitive to the tape holding it on. THe proper stuff was pretty thick and springy and really isolated it.

Nick Crego

Citizen #0168

PM  EMAIL  GALLERY  Attn:RR
03-13-2006 04:46 PM  11 years agoPost 4
Inferno666

Heliman

My Posts: All  Forum  Topic

thank you for the advice.

PM  EMAIL  Attn:RR
WATCH
 1 page 439 views POST REPLY
ProModeler Scorpion Power
HelicopterRadio - Servo - Gyro - Gov - Batt › CSM 360 for scale bell
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Wednesday, August 16 - 10:43 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online