RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 493 views POST REPLY
Scorpion Power ProModeler
HelicopterRadio - Servo - Gyro - Gov - Batt › Throttle Hold on 9C
03-08-2006 11:09 PM  11 years agoPost 1
Sipper

rrApprentice

Poole, Dorset, UK

My Posts: All  Forum  Topic

Hi Guys

I'm setting up a Trex using a 9C Super, however when I switch on throttle hold my collective servo is moving a few degrees. I have looked through all the menu options but cannot seem to find anything related to throttle hold being related to another function.

I have double and triple checked that all the servo's are correctly connected to the receiver.

Any ideas ? I bet its gonna be something really basic.

Thanks as always

Sipper

My memory's not as sharp as it used to be. Also, my memory's not as sharp as it used to be.

PM  EMAIL  GALLERY  Attn:RR
03-08-2006 11:17 PM  11 years agoPost 2
Naomi

rrElite Veteran

Ontario, Canada

My Posts: All  Forum  Topic

What position is your throttle stick and what condition switch position (Normal, idleup ) are you on when you switch on your throttle hold?

Naomi

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
03-08-2006 11:31 PM  11 years agoPost 3
Sipper

rrApprentice

Poole, Dorset, UK

My Posts: All  Forum  Topic

Hi there

I've tried it at various stick positions and only in normal mode - any ideas ?

Sipper

My memory's not as sharp as it used to be. Also, my memory's not as sharp as it used to be.

PM  EMAIL  GALLERY  Attn:RR
03-08-2006 11:36 PM  11 years agoPost 4
Naomi

rrElite Veteran

Ontario, Canada

My Posts: All  Forum  Topic

Well for eg.. your stick position is at the mid point .. Your normal is 0 degree on your collective. When you Flicks on the Throttle hold switch, The mid point of your Throttle Hold collective might not be 0 degree, that could have explain why your collective servo moves a few degree. If they both on 0 degree, the collective should not move at all.

Naomi

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
03-09-2006 02:02 AM  11 years agoPost 5
Dr.Don

rrVeteran

Cedar Park, TX -- USA

My Posts: All  Forum  Topic

You do realize there is an entire pitch curve for throttle hold. (??) If it is different from your normal curve, when you switch the collective is going to move to the pitch setting for the throttle hold curve.

2atlo8

PM  EMAIL  GALLERY  Attn:RR
03-09-2006 12:14 PM  11 years agoPost 6
pH7

rrKey Veteran

Sterling Heights, MI - USA

My Posts: All  Forum  Topic

Also, on the 9C there is a way to copy the entire curve in one operation. In the pitch curve menu cursor up to highlight the current curve name, click and release the dial, the Copy menu will present itself, turn the dial to the destination. Hold the dial down for a few seconds to confirm the operation.

PM  EMAIL  GALLERY  Attn:RR
03-09-2006 01:35 PM  11 years agoPost 7
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

Check that your curve is set up.

Also HOV-PIT and HOV-THR only function in normal, they may be enabled, if they are inhibit them.

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 493 views POST REPLY
Scorpion Power ProModeler
HelicopterRadio - Servo - Gyro - Gov - Batt › Throttle Hold on 9C
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Thursday, August 24 - 2:00 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online