RunRyder RC
 0  Topic Subscribe
WATCH
 1 page 414 views
HelicopterRadio - Servo - Gyro - Gov - Batt › Reflex Cable and 9Z
03-08-2006 06:49 PM  11 years agoPost 1
gkoutsis

rrKey Veteran

Athens Greece

My Posts: All  Forum  Topic

I have the 9C square plug but I would like to create one for the 9Z as well.

Do you know which pins I have to use on the round plug?

George

George

PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2006 07:57 PM  11 years agoPost 2
poerQwa

rrVeteran

Rotterdam, The Netherlands

My Posts: All  Forum  Topic

Hi George,

It's only 2 wires. 1 goes to ground and the other to pin 2 (so it says at the back of the DIN plug). Furthermore I can see that pins 4 and 5 are shorted.

Greetz,

Marc

PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2006 08:13 PM  11 years agoPost 3
gkoutsis

rrKey Veteran

Athens Greece

My Posts: All  Forum  Topic

if I remember correctly, in the RJ11 plug on the reflex dongle used pin 1 and 3. Do you know which color goes where?

George

PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2006 11:06 PM  11 years agoPost 4
poerQwa

rrVeteran

Rotterdam, The Netherlands

My Posts: All  Forum  Topic

I have an older cable (connecting the large din plug using jackplugs).
In this setup the brown cable is ground, the white cable is going to pin 2 on the Din plug(large round plug).

http://www.modelgadgets.com has a nice page with the description of both plugs

http://www.model-gadgets.com/info/infopage/infopage.htm

Greetz,

Marc

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 414 views
HelicopterRadio - Servo - Gyro - Gov - Batt › Reflex Cable and 9Z
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Wednesday, December 13 - 3:07 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online