RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 612 views POST REPLY
Helicopter
e-
Blade
Other › BCP Upgrade problem
02-08-2006 01:45 AM  12 years agoPost 1
Ninjaheliflyer

rrNovice

Ithaca, NY

My Posts: All  Forum  Topic

I recently installed the Blade upgrade on my Heli. I adjusted the proportional and gain as noted, that is, I decreased both to a small amount. Afterward, as I begin to increase my throttle to hover, the heli begin to spin head first in a clockwise circle. If any one can help? what happen?? lost!

Problem correct: First, the main motor wiring was reinstalled incorrectly, and this can happen to anyone upgrading to the AKE, the black wire must be on top and the orange wire at the bottom, therefore causing the blades to spin counterclockwise and causing the heli to just spin clockwise on it's vertical axis. Second, one of the blades was reinstalled backward, therefore, not allowing the heli to hover. Thanks goes out to everyone for their excellent advice

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 612 views POST REPLY
Helicopter
e-
Blade
Other › BCP Upgrade problem
02-08-2006 02:00 AM  12 years ago •• Post 2 ••
Stack

rrVeteran

Bethlehem, PA

My Posts: All  Forum  Topic

Ok, so you installed the AEK upgrade and now it's acting funky...

1. Did you try re-adjusting the proportional? If it is spinning clockwise you are going to want to turn it to the left.. but this all sounds a little strange to me.

2. Are you sure you plugged the motors back in correctly??

Check those items and let us know

PM  EMAIL  Attn:RR  Quote
02-08-2006 02:07 AM  12 years agoPost 3
slider46

rrProfessor

Ocala Florida

My Posts: All  Forum  Topic

Sounds like you might have plugged the tail motor in backwards..Do you have the DD tail upgrade?

Tom..... No "D" flying....

PM  EMAIL  GALLERY  Attn:RR  Quote
02-09-2006 10:46 PM  12 years agoPost 4
cadmanpilot

rrNovice

Chesapeake, Virginia

My Posts: All  Forum  Topic

Gyro and Gain Adjustment
Ninjaheliflyer,

I think you should have decreased them a "small" amount and not "to a small amount". I left mine alone at first and then tweaked them a little at a time.

Paul

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 612 views POST REPLY
Helicopter
e-
Blade
Other › BCP Upgrade problem
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Friday, April 27 - 9:39 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online