RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 511 views
HelicopterKyosho Caliber/Quest Neo-Caliber series › Throttle Servo, Caliber 30?
12-04-2005 06:14 PM  12 years agoPost 1
vortechZ230

rrElite Veteran

U.S.A.

My Posts: All  Forum  Topic

I want to upgrade to Jr DS 811 servos on the CCPM functions on my Caliber 30, Is it ok to use a Jr Standard 537 servo on the throttle?, or, should all the servos be the same??, Thanks!, for any advice......

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-04-2005 06:32 PM  12 years agoPost 2
dkshema

rrMaster

Cedar Rapids, IA

My Posts: All  Forum  Topic

The servos don't have to be the same. The DS811's have a 60 degree transit time of 0.18 seconds, the 537's a 60 degree transit time of 0.25 second. I don't believe you're going to notice any problems with a 0.07 second difference on the throttle, and you could probably compensate for it with slightly altered throttle curves if it were a problem.

I put some DS 537's in a Caliber this summer, they made for a heli that just felt a little bit more "crisp" in its response. The 811s should be a great servo for the Caliber. (Been using 811s in an EVO for two summers now, fly great, not a problem whatsoever).

Dave

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 511 views
HelicopterKyosho Caliber/Quest Neo-Caliber series › Throttle Servo, Caliber 30?
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Tuesday, December 12 - 4:41 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online