RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 734 views
12-03-2005 08:47 PM  12 years agoPost 1
flypaper 2

rrNovice

Kingston Ont. Can.

My Posts: All  Forum  Topic

Don't know if this came up before but you can get more right roll with a little mod. Just to show what I mean, plug everything in.With the chopper facing away from you, give right forward stick and you will see where the servo on the right is hitting the end of the slot before the servo has come to the end of its travel. I cut the end of the slot out so the servo now comes out of the end. Made an extender for the end of the slot from 1/64 plywood to keep the servo pin from coming out altogether. Now it turns to the right, forward with the same authority as left forward. Hope this helps.

PM  EMAIL  Attn:RR  Quote
12-04-2005 12:08 AM  12 years agoPost 2
rdlohr

rrKey Veteran

Pittsfield. MA USA

My Posts: All  Forum  Topic

Yep. I've also heard that the CF Swash that you can get to from Ricky Blazes site will also fix this.


-#-> Still Flyin, crashin and lovin it!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-04-2005 01:48 AM  12 years agoPost 3
copperclad

rrElite Veteran

NY

My Posts: All  Forum  Topic

hi
yes there are a few mods to get more travel , but be warned if you go too far the blades will tail strike or just be flexed too much and start failing at the grip , a little bit is fine though , what do they say? "all things in moderation " , dana

PM  EMAIL  GALLERY  Attn:RR  Quote
12-04-2005 10:18 AM  12 years agoPost 4
lavarocks

rrApprentice

Rochester, NY

My Posts: All  Forum  Topic

WOAH! These mods sound SCARY! Don't make the blades touch eachother!.

- chuckyteets

PM  EMAIL  GALLERY  Attn:RR  Quote
12-05-2005 06:05 PM  12 years agoPost 5
flypaper 2

rrNovice

Kingston Ont. Can.

My Posts: All  Forum  Topic

No trouble with tailboom or blades hitting. All it does is give the same travel to the right as it already has to the left.

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 734 views
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Monday, December 11 - 5:14 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online