RunRyder RC
 7  Topic Subscribe
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1035 views
Helicopter
e-
Align
Other › Align 35a and shutdowns?
12-04-2005 05:11 PM  12 years agoPost 21
lowandslow

rrKey Veteran

Spring Hill, TN

My Posts: All  Forum  Topic

I guess nothing is ever that simple. Tried it this moring and got a huge hit about 30 seconds into the flight. Back to the drawing board...

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-04-2005 05:46 PM  12 years agoPost 22
drdot

rrElite Veteran

So. California, Orange County.

My Posts: All  Forum  Topic

fwiw..

Been fighting this issue in my frankencopter..SE built from parts..Setup same as my CDE, which is flawless..

I've tried new esc, new motor, different t/r servo, starting to wonder if it may be metel /metal interference..This is happening with Align 35 esc, 430 motor as well as with Astro 803 and Jazz esc...Will try pcm next, but would really like to know why......

John.

PM  EMAIL  Attn:RR  Quote
12-04-2005 06:26 PM  12 years agoPost 23
lowandslow

rrKey Veteran

Spring Hill, TN

My Posts: All  Forum  Topic

It's got me baffled for sure. I just reconfigured all the electronics, moved the ESC to the back and the receiver to the front and separated everything as much as possible. I'll do a blades off spin-up check to see if it is still there.

I've build many e-choppers including my ION, Hawk conversion, and multitudes of micros. I've never had a problem like this.

This is what I get for wanting all the carbon and blue...

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-04-2005 06:51 PM  12 years agoPost 24
lbowen

rrApprentice

York S. Carolina-USA

My Posts: All  Forum  Topic

I have had the exact same with one of my 2 TRex - one time it was binding in the tail pitch control - that can be at the slider, etc. And one time it was the tail servo which was drawing to much current and the CC 35 was unable to feed the motor - sometimes I got just motor cutout and sometimes the ESC would shutoff until I zero the throttle which reinitiates the CC35. I use RCHover "glitch no more" which has helped enormously - except with this problem - I use Optic 6 radio and electron receiver - since correcting the servo and binding, I have not had any other power problems - and VERY few glitches - I have Duzi tail on 1 Rex and align metal on the other ( the screws to the plastic control links at the "tail rotor control set" HT 7001L XL part , are fairly loose - the Duzi tail has pivoting /bearing arms, as does the Heliup and new MH PRO tail unit) - I feel your pain - I remember the agony figuring out my problem!

lbowen

PM  EMAIL  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1035 views
Helicopter
e-
Align
Other › Align 35a and shutdowns?
 Print TOPIC  Make Suggestion 

 7  Topic Subscribe

Monday, December 11 - 7:08 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online