RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 532 views
Helicopter
e-
Align
Other › Align 35G ESC Timing
12-02-2005 02:02 AM  12 years agoPost 1
NQNA

rrElite Veteran

USA

My Posts: All  Forum  Topic

Anybody know the recommended timing for the Align 35G with a Align 3200KV motor? I've been running high timing but recently had a esc shut down.. with catastrophic results... Anybody think this might have caused the problem?

PM  EMAIL  GALLERY  Attn:RR  Quote
12-02-2005 02:13 AM  12 years agoPost 2
Bill Ludwig

rrVeteran

Tucson, AZ

My Posts: All  Forum  Topic

I'm running my 35A and 3200 motor at mid-timing with no problems and LOTS of power.

- Bill

PM  EMAIL  GALLERY  Attn:RR  Quote
12-02-2005 02:43 AM  12 years agoPost 3
zrdcorp

rrApprentice

Caguas, PR

My Posts: All  Forum  Topic

The ESC will shutdown with MID or HIGH timing if the temperature goes too hot.

Try to free up the golden heatsink from the shrink as much as possible (earlier version) if the newer version, then you may need to remove the heatsink from over the shrink and then partially remove the shrink and then put the heatsink directly in contact with the metal. Also make sure your gear fan is above the ESC heatsink.

Shutdown may also be a glitch. Tear up an old PC and look for the colorful donut shaped circuits and then remove them form the pc board and remove all the wire and shrink and unsulation and you have yourself and anti glitch device.

MID timing is absolutely the best unless you want to sacrifice your flight time for a little more power (It is just noisier, not that much power from HIGH timing).

Roger's Law: If it is worth doing it, it is worth exceeding it.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 532 views
Helicopter
e-
Align
Other › Align 35G ESC Timing
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Sunday, December 17 - 12:18 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online