RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 463 views
11-29-2005 03:29 AM  12 years agoPost 1
cwhitacre21

rrNovice

The Woodlands, TX

My Posts: All  Forum  Topic

Hi,

New to CCPM, I have a Raven 30 and a Futaba 9CHP.

Anyone have a setup sheet they could share with me. I can't seem to get Heli SR-3 to work the pitch correctly.

Using search I found a couple of links but the posts are closed.

Thanks, Cw

PM  EMAIL  GALLERY  Attn:RR  Quote
11-29-2005 04:09 AM  12 years agoPost 2
VinceH

rrApprentice

San Francisco,Ca

My Posts: All  Forum  Topic

Try this one, it may help you out.

http://centuryheli.com/support/manu...ravenECCPM.html

PM  EMAIL  GALLERY  Attn:RR  Quote
11-29-2005 06:52 PM  12 years agoPost 3
jackheli

rrProfessor

Vancouver - Canada

My Posts: All  Forum  Topic

To get the servos moving on the right direction, follow these quick steps:

1- using the reverse function, make sure all servos move up and down correctly when applying collective
2- using +/- AFR values, correct the direction of the cyclic input so the swashplate follows the movement of the cyclic stick.

Make sure there is no binding. The Raven requires very low AFR values (30~40%, if I remember well) in order for the head and the swash to move freely.

It's easy to find an excuse to do wrong. Hard is not to find an excuse to do right.

PM  EMAIL  GALLERY  Attn:RR  Quote
11-29-2005 10:03 PM  12 years agoPost 4
cwhitacre21

rrNovice

The Woodlands, TX

My Posts: All  Forum  Topic

That got it

Hi, Thanks much, that got it!

I have everything going in the correct direction. The swash is a little low at the bottom. I'll try reducing the AFR. If that doesn't work, I can lengthen the pushrods.

I appreciate your help.

Happy flying

Craig

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 463 views
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Saturday, December 16 - 6:55 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online