RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 470 views
HelicopterScale Model RC Helicopters › Made Progress Solving Tail wag and Retracts problems.
11-29-2005 02:50 AM  12 years agoPost 1
RevGadget

rrVeteran

Decatur, Alabama

My Posts: All  Forum  Topic

The Century Airwolf 30 (Hawk Sport mech.) is my first scale build and thanks to Bjarte and woppini for the help and suggestions. After turning the gain down on the GY240 did not stop the tail wag, I set my blade pitch again and adjusted the Tx curves. It seems the woodies were off track again and the curves were out of sync. However, the wire tail drive and Blades need to be replaced ASAP.

Due to binding, the retract servos broke all three bell crank mounts. I had a very close call when one broke on landing. I replaced and re-enforced the wood mounting using Bjarte’s advice.

So with a little more tweaking of the curves and trim, I believe it will make me a happy flyer.

Here’s a clip of it in action so far. http://webpages.charter.net/klfletc...ght_Airwolf.mpg


3D2me= One eye on the Tx, one on the Heli and my thumbs in between.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 470 views
HelicopterScale Model RC Helicopters › Made Progress Solving Tail wag and Retracts problems.
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Saturday, December 16 - 8:53 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online