RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 478 views
Scorpion Power Scorpion Power
HelicopterRadio - Servo - Gyro - Gov - Batt › Gyro 401 Setup In 9c
10-08-2005 01:08 AM  12 years agoPost 1
jag01

rrApprentice

Pennsylvania

My Posts: All  Forum  Topic

If I'm using GY in the Gyro Sens menu to set sensitivity then where do I set the the %'s in the End Point menu in the 9c for Channel 5? My tail rotor seems to move back and forth alittle never rock solid so to speak no matter what % I set in GY in Gyro Sens. I'm using HH (AVC). Thanks

Keep them blades turning !

PM  EMAIL  GALLERY  Attn:RR  Quote
10-08-2005 01:57 AM  12 years agoPost 2
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

If your using the gyro programming make sure the channel endpoints for 5 are 100 and you have the single wire plugged into channel 5.

Are you turning up the gyro in HH mode and waiting for a solid light?

Also if its a non 9CSuper, revo mixing is enabled by default, go in and turn that off.

What servo are you using and is DS on or OFF on the controller?

Did you set the rudder ATV's to 100 and adjust the throw in rate mode with the limit pot on the gyro for as much movement as you can get with no binding?

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR  Quote
10-08-2005 03:17 AM  12 years agoPost 3
jag01

rrApprentice

Pennsylvania

My Posts: All  Forum  Topic

The End Points were not set at 100% so I changed them to 100% in channel 5.

Revo Mixing is off.

Using the 9253 servo and the DS is on.

I had the rudders ATV set at 130 % and will reset it to 100%.

Limit is set for max throw with no binding.

If the weather breaks this weekend I'll give it a try.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 478 views
Scorpion Power Scorpion Power
HelicopterRadio - Servo - Gyro - Gov - Batt › Gyro 401 Setup In 9c
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Saturday, November 18 - 4:46 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online