RunRyder RC
 6  Topic Subscribe
WATCH
 1 page 593 views
Scorpion Power Scorpion Power
HelicopterThunder TigerOther › raptor 60 tail blades on a 50??
10-07-2005 06:43 PM  12 years agoPost 1
policerescue620

rrVeteran

las vegas, nevada

My Posts: All  Forum  Topic

ok I mounted some 60 stock tt tail blades on my raptor 50.. any concerns? anyone doing this? looking for feedback....

adding a breath of fresh air daily...!!!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-07-2005 07:27 PM  12 years agoPost 2
AzHyper

rrKey Veteran

Peoria, Az.

My Posts: All  Forum  Topic

Yes, but cut them down to 85mm if you are using 600mm mains. These are the poor man's carbon tail blades.

PM  EMAIL  Attn:RR  Quote
10-07-2005 07:32 PM  12 years agoPost 3
pcliftonjr

rrKey Veteran

Phoenix, AZ

My Posts: All  Forum  Topic

I'd cut them to 90mm that's a safe size when using 600mm blades. Plus it gives you an extra 5mm over stock.

Paul

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-07-2005 09:46 PM  12 years agoPost 4
x_Tomi_x

rrApprentice

TX

My Posts: All  Forum  Topic

cut them down to around 90-92 mm. I'm using Freya 92mm plastics.. works great..

-Tomi

T-Rex 600N Pro - OS50 Hyper - Align Pipe - GY401-S9254 - HS-965MG - AR7000

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-07-2005 10:14 PM  12 years agoPost 5
A. Bundy

rrElite Veteran

Aurora,IL. 30W/SW of​Chicago

My Posts: All  Forum  Topic

92mm.Stock they can hit.These cut 92mm R60 blades work perfectly fine for backwards/backwards inverted as long as you have a good gyro,fly coordinated turns,and don't bog the head in the turns.....And they are under 10 bucks.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-07-2005 10:51 PM  12 years agoPost 6
policerescue620

rrVeteran

las vegas, nevada

My Posts: All  Forum  Topic

they have been cut down to 92 mm and installed...its on a gy401-9254 combo.. I wll test her out later!! thanks.. joe

adding a breath of fresh air daily...!!!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-08-2005 01:17 AM  12 years agoPost 7
AzHyper

rrKey Veteran

Peoria, Az.

My Posts: All  Forum  Topic

I was wondering how you guys are able to run 90+mm tails blades until I measured my TT600 blades. They are really 606mm. Are you guys using other main blades or are your TT600's really 600's?

PM  EMAIL  Attn:RR  Quote
10-08-2005 01:31 AM  12 years agoPost 8
Oat

rrVeteran

CA

My Posts: All  Forum  Topic

I am using MAH 95mm on my Raptor 50. What would happen?

Insane Canopy | Kasama | Kontronik | Jeti

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-08-2005 02:19 AM  12 years agoPost 9
chuckhager

rrKey Veteran

Clovis, CA

My Posts: All  Forum  Topic

Normally one would put in stiffer dampners when goint to 90mm plus tail blades to reduce the chance of a blade strike.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-08-2005 02:47 AM  12 years agoPost 10
policerescue620

rrVeteran

las vegas, nevada

My Posts: All  Forum  Topic

thanks for the response chuck!! I will be adding stiffer dampers... its standard black now.. what about the red ones?

adding a breath of fresh air daily...!!!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-08-2005 02:54 AM  12 years agoPost 11
chuckhager

rrKey Veteran

Clovis, CA

My Posts: All  Forum  Topic

If you're after 3D then go for the red ones. For sport flying the blue ones will probably be okay but you increase the chance of a strike if you stick bang it at just the right moment. I've got the red ones in all my Raptor 50's and they work great. (With a metal head)

PM  EMAIL  GALLERY  Attn:RR  Quote
10-08-2005 02:38 PM  12 years agoPost 12
A. Bundy

rrElite Veteran

Aurora,IL. 30W/SW of​Chicago

My Posts: All  Forum  Topic

Freakout,the 95s will hit in a piroflip or some other hard manuver sooner or later.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-08-2005 02:39 PM  12 years agoPost 13
A. Bundy

rrElite Veteran

Aurora,IL. 30W/SW of​Chicago

My Posts: All  Forum  Topic

You also have to remember that boom lengths differ from how tight the belt is.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 593 views
Scorpion Power Scorpion Power
HelicopterThunder TigerOther › raptor 60 tail blades on a 50??
 Print TOPIC  Make Suggestion 

 6  Topic Subscribe

Wednesday, November 22 - 10:18 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online