I installed the 1.13 beta release on my CC 45 and the governor mode seems to work fine, but there is a huge difference between Gov-lo and Gov-hi settings. If I select Gov-lo mode I cant get a decent headspeed, even when I apply 100% throtle, and if I select Gov-hi mode it seems like it is either full power or nothing (6% throtle = nothing, 7% throtle = full power). So far I have been flying at full power all the time, but it would be nice to be able to lower the head speed sometimes

Has anyone else tried the 1.13 firmware with CC-45 and Twist 37?

I guess this firmware is a beta release, so I should probably get versoin 1.12 in stead...

Lorents

The new software has an extended throttle range which means that you may need to set the throttle range (ATV of Futaba radios) greater than 100% (usually 130 to 140%). Use the low governor mode and increase the ATV until the LED illuminates – that’s the max head speed point. Now use the throttle curve to set the desired headspeed.

... BTS

Hi BenT,

I did set the atv to 140-150. I'll try Gov-lo again and see what rpm I can get.

Lorents

Lorents,
Did you get it working?

.

... BTS

It started raining on me yesterday, but I will post as soon as I have tried it.

Lorents

Finally got time to test out Gov-lo again, and this time I got plenty RPM on it. At 90% I had about 2000 rpm. Works really well.

Must have messed up the end points on throtle last time

Lorents