RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 496 views
05-05-2005 08:04 PM  12 years agoPost 1
cainebean

rrApprentice

USA

My Posts: All  Forum  Topic

I'm putting the finishing touches on my Pred gasser. I have the metal push pull installed on the left side of the frame looking from the back to the front. Small arm on top big arm on bottom. I installed the ball links at 14 and 20 mm out. Are the rods links supposed to be the same distance on top and bottom? When I attach the bottom link and test it, everything is perfect. So I took that link off to use as a master to measure against. Put the correct one on bottom again and try to install the top and it needs adjusting. Is that normal?

Bean

PM  EMAIL  Attn:RR
05-06-2005 01:59 PM  12 years agoPost 2
Salesmanheliboy

rrVeteran

Nashville, TN

My Posts: All  Forum  Topic

Same size !

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
05-06-2005 02:31 PM  12 years agoPost 3
cainebean

rrApprentice

USA

My Posts: All  Forum  Topic

ok

I think I have figure out where my confusion lies! Yoda has set me straight.... As usual..... Once again..... I'm going to start kicking myself in the butt because I've been making the easy stuff hard!

PM  EMAIL  Attn:RR
WATCH
 1 page 496 views
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Wednesday, January 17 - 11:25 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online