RunRyder RC
 5  Topic Subscribe
WATCH
 1 page 1030 views
Helicopter
e-
Mikado
Other › Logo 14 esc
05-02-2005 11:22 PM  12 years agoPost 1
f_sea

rrApprentice

Los Angeles

My Posts: All  Forum  Topic

What is the best motor controller for a logo 14 running a C50-10xl 13t and 4s4p pro-lite 8000mah packs? I'm thinking of the Schulze 18.97k if I could figure out where to get it.

Thanks for the help.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-02-2005 11:25 PM  12 years agoPost 2
f_sea

rrApprentice

Los Angeles

My Posts: All  Forum  Topic

Oops - meant to say 5s4p pack in my post.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-03-2005 12:55 AM  12 years agoPost 3
Voyager

rrApprentice

Canada

My Posts: All  Forum  Topic

The CC 80 is a good choice.
http://www.castlecreations.com/

I have one in my L14.

... Rob

PM  EMAIL  GALLERY  Attn:RR  Quote
05-03-2005 02:12 AM  12 years agoPost 4
mudbogger2

rrKey Veteran

Hoschton,Ga.

My Posts: All  Forum  Topic

I have tried the Hacker master 77-O heli and am currently using a Kontronik Jazz 55-10-32. Both work great but I can use the govenor function with the Jazz.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-03-2005 10:23 PM  12 years agoPost 5
f_sea

rrApprentice

Los Angeles

My Posts: All  Forum  Topic

Also considering the Schulze 32.55K - anyone have any experience with this controller?

PM  EMAIL  GALLERY  Attn:RR  Quote
05-04-2005 12:34 AM  12 years agoPost 6
sailmike

rrApprentice

Northridge, California, USA

My Posts: All  Forum  Topic

Got the Schulze 32.55k in my Joker. Haven't flown with it yet though. Some sources for Schulze controllers:

RC-Direct.com
ICare-rc.com
FXAeromodels.com

Mike

PM  EMAIL  Attn:RR  Quote
05-04-2005 02:49 AM  12 years agoPost 7
f_sea

rrApprentice

Los Angeles

My Posts: All  Forum  Topic

I'll give them a try - thanks for the referral.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-04-2005 02:59 AM  12 years agoPost 8
Tony-V

rrApprentice

Fraser Mi

My Posts: All  Forum  Topic

I'll second the Castle Creations Phoenix 80.
I have about 5 Castle ESC's in both heli's and Planks, and they have never given me a problem.

check them out.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-04-2005 03:25 PM  12 years agoPost 9
f_sea

rrApprentice

Los Angeles

My Posts: All  Forum  Topic

CC80 sounds like another good option especially when considering their price. Thanks for the input.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-04-2005 03:35 PM  12 years agoPost 10
mudbogger2

rrKey Veteran

Hoschton,Ga.

My Posts: All  Forum  Topic

Just remember the CC80 will not do High Voltage like many of the other esc's mentioned. Just in case you ever wanted to upgrade in the future.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-07-2005 06:38 AM  12 years agoPost 11
DaBman

rrApprentice

San Diego, Ca.

My Posts: All  Forum  Topic

I'm flying a 20 with a Pletti 30/25/A3 and 8S4P. I use a Shultze 32.4 ESC and it works great. Very little heat in spite of running almost 30V through it. I like CC products and I use them on some of my other choppers but, I don't think even the 80 could handle the current. It might be able to handle the voltage temporarily but if your setup is not just right, you could experience high current draw and destroy the ESC. Again, the 32.4 is sufficient for MOST applications and is about a hundred bucks cheaper than the 32.5 Good luck with your project. PM me with any other concerns. Cheers!

PM  EMAIL  Attn:RR  Quote
05-07-2005 03:19 PM  12 years agoPost 12
f_sea

rrApprentice

Los Angeles

My Posts: All  Forum  Topic

Thanks for all the input. Decided to go with the Schulze 32.55K as it supports any future upgrade plans I may dive into.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1030 views
Helicopter
e-
Mikado
Other › Logo 14 esc
 Print TOPIC  Make Suggestion 

 5  Topic Subscribe

Tuesday, January 16 - 5:30 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online