RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 472 views POST REPLY
HelicopterBeginners Corner › swash plate not doing as it should
05-02-2005 11:18 AM  12 years agoPost 1
Leehollingworth

rrNovice

Chesterfield, Derbyshire, England

My Posts: All  Forum  Topic

ok ive got a raptor 50v2 with a jr x2610 radio but the servos arnt doing what they should.....by that i mean as i move the throttle the swash tilts from left to right but as i move the right stick left and right the swash moves up/down evenly which should be the other way round surly?

i just had to change the radio to stick mode 2 to get the throttle on the left stick with the rudder cos they were on different sticks, what can i do to rectify this new problem? please help?

PM  EMAIL  Attn:RR  Quote
05-02-2005 11:51 AM  12 years agoPost 2
rookie5

rrVeteran

Harlow, Essex - United Kingdom

My Posts: All  Forum  Topic

you may have got the leads mixed up in the receiever ?

PM  EMAIL  Attn:RR  Quote
05-02-2005 05:19 PM  12 years agoPost 3
w8qz

rrVeteran

Grand Rapids, MI - USA

My Posts: All  Forum  Topic

You need to re-connect your servos at your receiver, to get the proper mechanical movement at the heli associated with the correct stick movement.

In other words, swap the leads for the collective servo, and the 'roll' (a.k.a. aileron servo), at your receiver. I'm not sure where your throttle servo connects in all this - typically there are separate receiver channels for throttle and collective, although controlled by (1) stick axis. (Not familiar with the particular radio you have.)

You're also going to have to make sure things work the correct direction.

You should have an instruction manual for your radio. Study this carefully - to get a basic idea of how r/c radio gear works. If that doesn't help you, you're going to have to get some local help. It will be very difficult to explain this, in detail, via this forum.

"The helicopter is much easier to design than the aeroplane, but is worthless when done."

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 472 views POST REPLY
HelicopterBeginners Corner › swash plate not doing as it should
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Friday, January 19 - 12:00 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online