RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 613 views POST REPLY
HelicopterHIROBOOther › Instructions for Sceadu EVO CCPM upgrade
03-29-2005 04:36 AM  13 years agoPost 1
John Krebs

rrVeteran

Pittsburgh, PA

My Posts: All  Forum  Topic

I just got an EVO kit and the SWM conversion kit but the SWM kit had the wrong instructions in it. Does anyone have them that could scan them and send them to me?

Thanks
John

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-29-2005 04:41 AM  13 years agoPost 2
BDIS

rrApprentice

Valdosta, Ga

My Posts: All  Forum  Topic

I got mine from MrNoodles Gallery

PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2005 08:02 AM  13 years agoPost 3
RCfun

rrApprentice

Denmark

My Posts: All  Forum  Topic

This might not mean much to you but the link given is for the older Sceadu not the Evo. The rod length suggested in this manual is a bit different. Also the way the elevator and aileron bell cranks are put together is a bit different.


/RCfun.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2005 08:36 AM  13 years agoPost 4
mrNoodles

rrProfessor

Borlänge, Sweden

My Posts: All  Forum  Topic

From the servos and up to the swash the EVO and the Sceadu is the same.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-29-2005 12:11 PM  13 years agoPost 5
RCfun

rrApprentice

Denmark

My Posts: All  Forum  Topic

What steps do you need I might be able to scan a few pages from the SWM manual if needed and email them to you.


/RCfun.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2005 01:00 PM  13 years agoPost 6
John Krebs

rrVeteran

Pittsburgh, PA

My Posts: All  Forum  Topic

I need to know where the brackets, crossmembers, spacers, etc go. Some, I have figured out from what I remember from seeing a couple at the field. The manual posted above is also helpful. I was wondering if I should use the inner or outer holes on the arms. The posted manual appears to show the inner holes being used.

I also can't seem to find a bearing that fits the arm that attaches to the
front of the swash. Maybe that's in another bag.

Thanks
John

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-29-2005 01:14 PM  13 years agoPost 7
RCfun

rrApprentice

Denmark

My Posts: All  Forum  Topic

Tommorow I can bring both the HPM and SWM manual with me to work and scan the steps that are different between the two. Then email them to you if you PM me your email address.

You have the push pull conversion - right? (not the old non push pull system for the Sceadu).

/RCfun.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2005 01:21 PM  13 years agoPost 8
mrNoodles

rrProfessor

Borlänge, Sweden

My Posts: All  Forum  Topic

Inner holes on the arms should give 'enough' travel.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-29-2005 05:12 PM  13 years agoPost 9
John Krebs

rrVeteran

Pittsburgh, PA

My Posts: All  Forum  Topic

RCfun

I have a new EVO kit which includes the HPM instructions and the push-pull CCPM conversion.


Thanks
John

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 613 views POST REPLY
HelicopterHIROBOOther › Instructions for Sceadu EVO CCPM upgrade
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Monday, April 23 - 4:26 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online