RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 439 views POST REPLY
HelicopterClassifieds - Miscellaneous Sold  MinAir Fury 33" carbon fiber tailboom/torque/support/p ushrod setup, new.....
03-29-2005 03:45 AM  13 years agoPost 1
BonkersrrApprentice - New York - My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

I have a Miniature Aircraft 33" tailboom setup that has never been flown, only assembled. I plan on putting a body on my heli and needed a shorter tail boom kit.

Included is (obviously) the 33" carbon fiber tail boom, the appropriate torque-tube, the appropriate tail boom supports with the molded ends (already assembled), and the graphite pushrod with molded ends. Again, these have never been used in flight. The 33" boom setup came with my heli, and after assembling everything, I determined that I needed a shorter boom.

This kit, purchased new from MA would cost $45 for the boom, $34 for the torque tube, $20 for the boom supports, and $15 for the graphite pushrod. That's $115 + shipping. You can have this setup for $70 + shipping (which I'm guessing would be about $5, give or take).

There is one single flaw with the tail boom: the screw hole where you place that tiny screw (which seems to serve no purpose) through the tail gearbox clamp and into the tailboom had to be widened slightly because MA drilled the hole in the clamp in a different place than what was described in the instructions. It's an exceedingly minor flaw that wouldn't even qualify as cosmetic, but Inevertheless I'm selling the whole setup for $45 less because of it. Buy it and you'll see exactly what I mean.

If you want pictures, I'll be glad to send you more.

e-mail me if you have questions, want pictures, or want to buy it.

mas3y@go.com


[img] /helicopter/gallery/21130/MABoom.jpg [desc]

PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2005 03:47 AM  13 years agoPost 2
Bonkers

rrApprentice

New York

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

Addendum: screws & washers included too.
.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 439 views POST REPLY
HelicopterClassifieds - Miscellaneous Sold  MinAir Fury 33" carbon fiber tailboom/torque/support/p ushrod setup, new.....
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Classifieds › HELP-FAQ
Attention Buyers! To receive feedback Post Reply in the seller’s topic. The seller can then click your post's Add Classified Feedback link.
Attention Sellers! Stating price is not mandatory but recommended. Post Reply commentary that interferes with the selling process (and not replied to) will be removed upon request. Click Attn:RR on the offending classified post. Repeated NIB-NIP sales are not allowed. Take it to EBay.
Buyer Beware! RunRyder cannot vouch for any seller's or buyer's credibility and will not accept responsibility for any transactions resulting from the use of this site.

Saturday, April 21 - 10:19 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online