RunRyder RC
 0  Topic Subscribe
WATCH
 1 page 435 views POST REPLY
03-29-2005 01:06 AM  13 years agoPost 1
nissinxx

rrNovice

Ham Lake MN USA

My Posts: All  Forum  Topic

I got a rex with a 13turn motor.
At a havor the tail wages and at a hard climb
it will kick the tail to 90degrees plus.Ihave the 401.
delay is at 0 and if I turn the gain down it can spin 180 plus and at 100 percent it will still kick 90 plus and wage very fast .

Looking for info
Thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2005 02:42 AM  13 years agoPost 2
jkelly

rrVeteran

Bedford, PA

My Posts: All  Forum  Topic

Are you running in heading hold? For heading hold and depending on your radio you can make sure you have your revo mix set to 0 instead of inhibited and if your radio has a gyro function make sure it's above 50%, if you are using gyro atv settings make sure you are between 10 and 90%

Check your head speed to make sure you are turning the tail fast enough to keep it steady. Perhaps larger tail blades may help too.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2005 03:23 AM  13 years agoPost 3
nissinxx

rrNovice

Ham Lake MN USA

My Posts: All  Forum  Topic

Yes I am running heading hold
I got the 9c Radio.
rudder atv at 60%
rev mixing is inh
to set mixing to 0 instead of inh . WHY ?
I have it inhited on my 50 and have NO problems
But I will try it .

My head speed is about 2300

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 435 views POST REPLY
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Monday, April 23 - 7:58 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online