RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 666 views POST REPLY
03-28-2005 06:33 PM  13 years agoPost 1
1275mini

rrKey Veteran

Wirral North West U.K.

My Posts: All  Forum  Topic

Can the JR8511 servo be used with the CSM560 in super servo mode just collecting all the info before i start work on my new vario xvl

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-28-2005 08:44 PM  13 years agoPost 2
Patriot

rrVeteran

Luton

My Posts: All  Forum  Topic

I would not use the 8511 as a tail servo, to slow and a bit of an overkill on the torque. The only JR servo to use would be the 8700 (Futaba servo 9253 or the 9254). The 8511 is more sorted for a pitch servo.

Just smile

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-28-2005 09:03 PM  13 years agoPost 3
1275mini

rrKey Veteran

Wirral North West U.K.

My Posts: All  Forum  Topic

8700 is down on torque for the tail on the VXL i have the 8511's laying around in the workshop ! i was going to use one on the tail and four on the head

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-29-2005 08:13 AM  13 years agoPost 4
DOKEY

rrProfessor

Northamptonshire UK

My Posts: All  Forum  Topic

http://www.macgregor.co.uk/radio/servos.htm#DIGITAL


8511 comes in as a digital, so yes, use it in Super servo mode.

Ryan.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-29-2005 12:21 PM  13 years agoPost 5
G.Man

rrProfessor

Bristol

My Posts: All  Forum  Topic

8511 is too slow really at nearly 0.2 seconds for 60 degrees... the gyro will be under correcting in super servo mode IMHO...

If you need higher torque consider something like a Hitec 6965 0.1 seconds and 6.6kg torque or the 5925MG both of which are fine in DS mode

Don't Email me as I wont reply - PM Only (spam countermeasures)

PM  EMAIL  GALLERY  Attn:RR  Quote
03-30-2005 12:16 AM  13 years agoPost 6
TMoore

rrMaster

Cookeville, TN

My Posts: All  Forum  Topic

560 + WRX. Works a treat!

TM

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-30-2005 04:27 PM  13 years agoPost 7
1275mini

rrKey Veteran

Wirral North West U.K.

My Posts: All  Forum  Topic

Just got this email today from Andrew at CSM :

Hi Barry,

The 8700g should be OK for the tail still but you can drive the 8511 in Digital / Super Servo mode. All digital servos from both JR and Futaba that we are aware of can be driven in DS mode from our gyros.

Best regards,

Andrew Powell (CSM).

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-30-2005 05:12 PM  13 years agoPost 8
G.Man

rrProfessor

Bristol

My Posts: All  Forum  Topic

Driven in DS mode and work well in DS mode are different things tho...

The sanwa/airtronics wrx would be my choice for speed and torque

Don't Email me as I wont reply - PM Only (spam countermeasures)

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 666 views POST REPLY
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Friday, April 20 - 3:43 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online