I wonder how many buddies are using outrunner on the Zoom.
Which band of outrunner is the best value for money ? Thank for advice

I am using the 400 from justgofly.com

No. I am not affiliated with justgofly in any way. I paid the same price for my motor as anyone else.

I'm using a Twister EM 300/20 (axi 2208/20 clone) on TP 3s 1320 and 2100.

Just curios, What are the KV rating on above mentioned motors?

I also have no affiliation with JustGoFly.com and paid the same price as anyone else also.
This has been and is a great motor. I have been flying this motor with a Like90 8Tooth pinion for 4 months now at least everyother day and go through at least 2 TP2100 packs ,,sometimes 4 of them and the motor runs super cool. I check it now and then and the temp of the motor is so low I don't even bother anymore.
The KV for the 400DH has been upgraded to 4400KV. I believe this applies to all new and old motors sold.
This motor is very light and packs a awesome punch. The sevice is amazing[ I haven't needed any but ask questions via email and get respoces well within the hour]\
This motor need NO heatsink even if it was possible[outrunner]
It barely gets warm.
I highly recommend this motor and many others will say the same thing.
Do search on this list on the 400DH.

Hi, can this 400 motor being run at 14.4 volts ?

I think so but am not sure.
Ask Vinnie at http://www.Justgofly.com

I have the twister em300 with 5s packs and phx 10 esc... this thing ROX!!! Having lots of fun with it once I went to belt...

Mike
http://www.mikescolesheli.com

Mike,

I spoke with you briefly on the phone tonight about your shogun setup. I forgot to ask you about a pinion gear for the axi/axi clone motor. How many teeth, what shaft size, and where did you buy it? Finally, what brand are your battery packs and what charger do you use?

Thanks again,
Tyler

Doc, same question. Where did you get 1s5 packs? What pinion. I am about ready to test fly and 2s3p seems week with twister and 11 tooth.

Here..

Wayne,
You can get just about anything you want from Tanic.
http://www.tanicpacks.com/catalog/index.php

Tammies had some Tanics in stock. I got 2 3s2p packs from Craig a few weeks ago for my Logo, but I didn't ask about any other configs.
I know Tanic will custom build it if they don't have it on the shelf also.

Can you use a 2s3p and a 3s3p in there?

Jason Stiffey
Fly Fast....Live Slow...

Hey guys, what does outrunner mean?

The out side of the motor rotates around armature

Thanks Jason, It is my understanding the Axia and Twister need higher voltage. I have an apage 2S3P and it is anemic.

Right.

I wouldn't mess with something like that running under about 18V or 5S.
If you put the 2s and 3s in series you would get 5s, but I don't know how much room is in the battery tray area of the Zoom.

Jason Stiffey
Fly Fast....Live Slow...