RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 452 views POST REPLY
HelicopterMain Discussion › Xero-G Manuel
12-09-2004 03:34 AM  13 years agoPost 1
BDIS

rrApprentice

Valdosta, Ga

My Posts: All  Forum  Topic

Anyone have one they can spare? I need the instructions on setting up the cyclic as far as arm and rod length. I bought my copter second had and didn't get a manuel.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-09-2004 04:32 AM  13 years agoPost 2
BDIS

rrApprentice

Valdosta, Ga

My Posts: All  Forum  Topic

Better yet can anyone tell me what the book says the Servo arm lengths should be. The setup I have now has the aeliron and pitch servoes with 19.5 MM arms and the elevator has a 18 MM arm. That sounds wrong to me. Thaought all the servos arms on a eCCPM system should be the same length?

PM  EMAIL  GALLERY  Attn:RR  Quote
12-09-2004 07:03 AM  13 years agoPost 3
benben

rrVeteran

Taipei

My Posts: All  Forum  Topic

It says 20mm servo arms on all three.

PM  EMAIL  Attn:RR  Quote
12-09-2004 07:08 AM  13 years agoPost 4
ScotY

rrApprentice

USA

My Posts: All  Forum  Topic

The servo arms should all the the same length...20mm. You might be able to get away with 19.5mm large wheels if you're using Futaba servos but 20mm is ideal. Keep everything 90 degrees at half stick/zero pitch. The setup is fairly simple...nothing unusual. Just one thing...increase the value on the swash menu on your tx to make sure you have about 6 degrees cyclic pitch.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-09-2004 12:23 PM  13 years agoPost 5
BDIS

rrApprentice

Valdosta, Ga

My Posts: All  Forum  Topic

Thank Guys
I replaced the 18mm arm with a 19.5 mm to match the other 2 arms. I'm running 10,-10 on collective and 8 degrees on cyclic. Almost all the interaction is gone. I'll order somw 20mm arms today to see if that gets rid of the last bit of interaction.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 452 views POST REPLY
HelicopterMain Discussion › Xero-G Manuel
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Saturday, January 20 - 1:13 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online