RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 475 views POST REPLY
HelicopterHIROBOOther › freya 61
12-07-2004 02:15 AM  13 years agoPost 1
jameswill4

rrVeteran

Pineville KY

My Posts: All  Forum  Topic

ok guys I got a freya!!! I have a ys 61 and I have a few questions. What pipe do you think for this setup? Also what size tail blades with some 680mm TT blades? Anything I should add from the start?
What are the part numbers for the longer links to use the bottom hole on the main mast?
Last question when using a Ys engine DO I need a washer bewteen the fan and the motor as I bought this used and there is no washer?

PM  EMAIL  GALLERY  Attn:RR  Quote
12-07-2004 02:19 AM  13 years agoPost 2
jameswill4

rrVeteran

Pineville KY

My Posts: All  Forum  Topic

oh sorry guys one more thing . I was looking at the carbon xtreme website It seems there are a few diffrent sets of dampners which ones do I need for the stock freya?

PM  EMAIL  GALLERY  Attn:RR  Quote
12-07-2004 02:21 AM  13 years agoPost 3
z11355

rrMaster

New England

My Posts: All  Forum  Topic

the version2 damper set, $49

PM  EMAIL  GALLERY  Attn:RR  Quote
12-07-2004 02:52 AM  13 years agoPost 4
TMoore

rrMaster

Cookeville, TN

My Posts: All  Forum  Topic

The stock blades work fine all the way up to NHP 700's. I fly the 700's. Like Z said the Carbon Xtreme V2 Dampners with the B setup work really well for me.

If you want to make that 61 come alive get a Funtech or a KSJ Muffler.

TM

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-07-2004 09:14 AM  13 years agoPost 5
mrNoodles

rrProfessor

Borlänge, Sweden

My Posts: All  Forum  Topic

Running 95 with 680 mains shouldnt be a problem if you decides to get some other tailblades.
I took a look at my Freya with YS91 (it uses the collet for the flywheel/fanhub) and there´s no washer between the collet and engine.
The WC flywheel (that comes with the XSpec and more) needs a washer between the flywheel and engine.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-07-2004 02:20 PM  13 years agoPost 6
Scooterpilot

rrKey Veteran

Southern, California

My Posts: All  Forum  Topic

Muffler

YS 61 and a Hatori SB 15 is a good match.

NHP T/R blades

Regards

Two G-4's & X50's YS60SR,Futaba 18SZ/12Z/14FG, ,Rail Blades Rep

PM  EMAIL  GALLERY  Attn:RR  Quote
12-07-2004 04:28 PM  13 years agoPost 7
I3DM

rrProfessor

Israel

My Posts: All  Forum  Topic

i would have used 680mm mains \ 95mm tails and CX V2 dampners.

the YS61 fits right in with no mods.

about the rods, cant remember the P\N but the lengths are 50mm and 75mm (2 of each).

enjoy your new machine.

www.liorzahavi.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-07-2004 05:08 PM  13 years agoPost 8
mrNoodles

rrProfessor

Borlänge, Sweden

My Posts: All  Forum  Topic

50mm is #2522-006
75mm is #2522-022

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-07-2004 05:15 PM  13 years agoPost 9
jameswill4

rrVeteran

Pineville KY

My Posts: All  Forum  Topic

Where do these rods go? Is the metal radius block worth the upgrade? Is there a benefit of diffrent paddles or are the stock ones fine for 3d?

PM  EMAIL  GALLERY  Attn:RR  Quote
12-07-2004 05:17 PM  13 years agoPost 10
z11355

rrMaster

New England

My Posts: All  Forum  Topic

long rod from swash to mixing arm
short rod from washout arm to flybar support 'birdcage'

metal radius block is good, esp if the mainshaft
doesn't have knurling

stock paddles are excellent. remove brass weight

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 475 views POST REPLY
HelicopterHIROBOOther › freya 61
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Sunday, January 21 - 5:02 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online