RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 1264 views
Scorpion Power Scorpion Power
HelicopterOff Topics › E-Machines
10-25-2004 01:03 AM  13 years agoPost 1
xcellflyer

rrApprentice

Lake View Terrace CA​91342

My Posts: All  Forum  Topic

hey
does anyone out there have an E-Machines computer?? i do.. it the t2682 version..pretty nice. have any of you upgraded anythoing on it??video card?hard drive?memory?

Deadstick: Two of these can be found on a transmitter that has been inproperly charged.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-25-2004 01:20 AM  13 years agoPost 2
TurboRacer

rrVeteran

CT

My Posts: All  Forum  Topic

you usually can't upgrade E-machines - at least all the ones I've ever saw.. They're pretty basic/budget pc's. What are the specs?

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
10-25-2004 01:24 AM  13 years agoPost 3
xcellflyer

rrApprentice

Lake View Terrace CA​91342

My Posts: All  Forum  Topic

specs

2.6ghz intel celeron processor...80gb hard drive...256mb ram memory.intel extreme 3d graphics card..it says you can dd to the hard drive and memory.but i dont know about the graphics or video card?

Deadstick: Two of these can be found on a transmitter that has been inproperly charged.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-25-2004 01:40 AM  13 years agoPost 4
xcellflyer

rrApprentice

Lake View Terrace CA​91342

My Posts: All  Forum  Topic

upgrades

i just sent an email to the company and this is what was replied.

Dear Andrew Huertas:

Thank you for contacting eMachines.

I see that you would like to know if your system could support the Radeon X700 or higher video card. In addition, you would also want to know if you could upgrade your hard drive and use Western Digital hard drives. Lastly, you need information regarding the slots for a video card and memory upgrade on your T2682 eMachines computer.

I understand your concern. However eMachines cannot recommend any 3rd party upgrades. There are several reasons for this. There are simply too many types of 3rd party upgrades for eMachines or any computer company to test in their systems, so they can then recommend them to their customers. In addition, an end user's system may already have several new 3rd party devices or software packages installed, therefore changing the system to a different configuration. This could cause a great deal of conflicts between devices and software on the system.

How upgrading works for the end user that wants to do it themselves, is that you find out what your system's specifications are, then you go shopping for the hardware or software you want to upgrade to. Once you have settled on several possibilities, you would then check on the side of the box that the software or hardware is in for the Minimum System Requirements of that product. If shopping online then these minimum system requirements should be available online as well. Now you would compare those system requirements to your systems specifications. Your system's specifications should meet or preferably exceed those requirements.

In addition, any changes or upgrades to the original configuration of the system are done so at the sole risk of you the end user. Any support for added 3rd party software or hardware will need to come from the manufacturer of that product.

Here are your system's Specifications:

CPU: Intel Celeron 2.60 GHz
Memory: DDR PC2100 DIMM (256 MB)
Power Supply: Bestec ATX-250 250 Watt
Video: Intel Extreme Graphics 3D 845GV AGP
Audio: RealTek ALC202A
Hard Drive: Western Digital 80 GB WD-800AB
Primary Optical Drive: 16X DVD / 48 X CD Samsung SD-816B
Sec. Optical Drive: 48x / 24x / 48x Samsung SW-248F
Floppy Drive: Samsung SFD-321B/LTGNQ
Modem: PCI MAC Systems MA560CI v.92 (Conexant)
Network Interface Card: RealTek 8101L 10/100 PCI


I recommend checking our parts website at http://parts.emachines.com/emachines/ for the part that you need. If you prefer, you can also give our Parts Department a call at 1-888-368-7898. They will be able to provide you with part availability and pricing.

If they do not have the part available, you may wish to consider searching online or with third party vendors for the part that you need.


With regard to the video card and memory slot, I have checked our records for your system and found that it has three PCI expansion slots installed to accommodate a video card upgrade. On the other hand, the TriGem International ImperialGV motherboard installed in your system supports the DDR memory type.

For your convenience, here are the RAM specifications of your system:

Number of RAM Slots: 2
Total RAM Capacity: 2048 MB
RAM Stick Size Limit: 1024 MB
Module: DIMM
Type: DDR
Number of Pins: 184 pins

Your system has a 256 MB DDR PC2100 DIMM memory stick installed. However, the motherboard can support DDR PC2700 DIMM. In this regard, I would suggest purchasing a PC2100 memory module although the motherboard supports PC2700 memory modules. Mixing RAM of different speeds usually causes the system to crash frequently or not to boot up. In addition, we cannot guarantee compatibility of any memory module other than the ones we install.

Please be aware that whenever the case is removed precautions should be taken against electrostatic discharge (ESD). Make sure that the computer is off and unplugged. Please maintain contact with a grounded source, such as your computer's frame or use a grounding strap. Damage resulting from improper grounding may not be covered under the manufacturer's warranty if these precautions are not taken. Simply breaking the seal will not void the manufacturer's warranty.

It is my hope that this information will be helpful to you.

Should you require further assistance with your eMachines system, please feel free to send another message. Your comments and suggestions are welcome.

Sincerely,
Jason

eMachines recommends you frequently backup data files off the system to prevent data loss.

eMachines now offers one and two year Extended Service Plans (ESP). For more information or to purchase an eMachines ESP**, please call us at 877-566-3463 or visit us on the web at http://www.emachines.com/esp.
**Currently not available in Puerto Rico, Arizona or for Canadian Notebooks.
============================================================

eMachines authorized replacement and upgrade components are available by calling 1-888-368-7898 or visit us on the web at http://parts.emachines.com/emachines

xxxxxxxxxxxxxxxxx Orignal Message xxxxxxxxxxx
hi
can i upgrade the video card on this model. can i use the radeon x700 video card or other hi-end video cards. can i also upgrade the hard drive?? can i use the western digital hard drives?? what king of slots are the video card slots and memory card slots??

so i guess you can upgrade, but you have to do the upgrades yourself

Deadstick: Two of these can be found on a transmitter that has been inproperly charged.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-25-2004 02:06 AM  13 years agoPost 5
TurboRacer

rrVeteran

CT

My Posts: All  Forum  Topic

they don't know what they're talking about. They said you have spare PCI slots - you wouldn't want a vid card in a PCI slot.

It does mention an AGP video card - that's the slot you'd use. It would probably work (ok at best), but it would be like putting $4,000 rims on a $50 car..

The celery CPU to start is a POS.

Did you just buy this new? It'll work fine for surfing the web, word docs, listening to MP3's, etc, but I hope you didn't buy it with games as a big concern!!

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
10-25-2004 03:19 AM  13 years agoPost 6
Chem Geek

rrVeteran

AL

My Posts: All  Forum  Topic

Hey the new Celerons are somewhat respectable. But yea, not that particular kind.

No the eMachine cannot hand the X700, for starters it doesn't even appear to have an AGP slot for upgrading (a lot of these cheap computer say they have AGP video, which is built, but they don't actually have a slot, which is a cost saving measure). Add to that, that the X700 doesn't even use AGP, but PCI-Express, and you haven't got hope for this particular upgrade.

So, I agree with the others, it's just not worth upgrading. If you want serious power like the X700 has, you're going to have to spend so cash to get there, as you're going to need some of the higher end stuff that supports the PCI-Express. I think the only ones doing that on motherboards right now are the Athlon 64's and the latest P4's.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-26-2004 10:23 PM  13 years agoPost 7
xcellflyer

rrApprentice

Lake View Terrace CA​91342

My Posts: All  Forum  Topic

new cpu

hi
what would be the best motherboard/processor that i could get for the least amount of money. i dont want an athlon, i want a P4. i know you have to buy the motherboard and processor seperately so what would be the best combo to get (mother bard??, processor??). is there anything elses i need for the motherbaord? not including drives and memory. what about chip sets? what are these anyway??

Deadstick: Two of these can be found on a transmitter that has been inproperly charged.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 1264 views
Scorpion Power Scorpion Power
HelicopterOff Topics › E-Machines
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Friday, November 17 - 7:18 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online