RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 766 views
Scorpion Power Scorpion Power
HelicopterOff Topics › CXD blades
10-24-2004 10:41 AM  13 years agoPost 1
PietervA

rrVeteran

New Zealand

My Posts: All  Forum  Topic

I'm about to order a set of the 600mm blades to try for my Raptor 50. Any experiences out there? With an eye on safety and performance, I tend to go for tried and trusted.

Thanks for your feedback.

PM  EMAIL  GALLERY  Attn:RR
10-24-2004 01:19 PM  13 years agoPost 2
Pete Niotis

rrApprentice

Grand Haven MI, USA

My Posts: All  Forum  Topic

Hi pva....

Safety - CXD Blades are very safe, they have a metal safety strip embedded down the length to stop blade pieces form being airborn in the event of a severe crash.

Performance - These are the best blades I've had the opportunity to fly, they are extremely stable yet very fast on the cyclics. The "equal" combination between stability and speed is something hard to find in all other brand of blades today. Blades usually compliment one more than the other, blades are either very stable yet slow to hook up on collective and slow on cyclics or are very unstable yet quick on the cyclics and collective response. Try the CXD's, I'm confident you'll love them.

PM  EMAIL  Attn:RR
10-24-2004 05:24 PM  13 years agoPost 3
Henrik Engert

rrKey Veteran

Cedar Park, TX

My Posts: All  Forum  Topic

Hi

Would they work as FAI blades? Would they be good for the Frya XSpec? Length wise that is.

-Hinke

PM  EMAIL  Attn:RR
10-24-2004 05:25 PM  13 years agoPost 4
sluggo

rrElite Veteran

Kitchener Ont

My Posts: All  Forum  Topic

I to have flown the CXD blades and they are one of the best blades I have had the pleasure of flying since I have been in this hobby. Doug really knows his stuff and is making a top the line blade. As Pete has pointed out the blade gives you the best balance between stability and quick cyclics. The blades are also very efficient and do not rob the engine of power like alot of other blades out there.

They also auto better then any other blade that I have tried. 3D autos are a breeze with these blades and have a ton of energy left at the end of a auto. Call up Doug and have a chat with him, I am sure you will be very happy with the support you get. CXD blades are going to take the heli hobby by storm!!!

hinke yes they would be great blades for fai, They are the most stable blade that I have every flown, Doing big manoeuvres are much easier with the CXD blades. The blades are very predictable and track like they are on rails.


Chris

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
10-24-2004 06:53 PM  13 years agoPost 5
PietervA

rrVeteran

New Zealand

My Posts: All  Forum  Topic

Thanks for the very speedy confirmation. My order has just gone through, and now I'm impatient, of course!

Regards

PM  EMAIL  GALLERY  Attn:RR
10-24-2004 08:26 PM  13 years agoPost 6
gamberopiloto

rrNovice

Vancouver BC

My Posts: All  Forum  Topic

Sluggo VS the world

HAHAHAH you started it buddy and now you want to be friends!!!! You try to trash my name all over the US, You did everything in your power to ruin My business, You talk crap to my close friends and try to get them to turn on my me, and now you want to be my friend? GO TO F*&%ING HELL YOU PUNK A$$ B@#CH!!!!!!!!!
You know I have layed back in the cut and watched a ton of BS unfold in the way of Sluggo and the manner in which he has been dealing. I respect Doug Adams and I enjoy his product which has little or no bearing with the respect that I would hate to see Sluggo's name associated with CDX blades.

As I remember for close to 4 years Chris flew MAH blades, did his best to represent the company and he and Dmitre s/p were friends, then he and Alex from Canada tried to back door him by bringing blades into the country offering to pay the manufacture thousands then welching on the deal losing the whole MAH deal ruining the name, which now is in the hands of Dmitre. Now Sluggo is sweating Doug Adams.....Doug see through his BS don't associate yourself or your companies rep on this jackass.

Sluggo weren't you flying for Hirobo last year claiming that they were tops, now your flying for MinAir......get a better deal deep throating Tims nuts! See Dmitre has been seen at numerous events, spending tons of cash promoting the MAH blade. Where are you again? Where have you been? Dude your title fits you, you are just a slugg....O

Last I checked the man tried to make a mends with you, what, your not man enough for that? Take a hard long look at yourself!

As for blades, all of the ones mentioned, MAH, CDX, SAB, V's and NHP have their aspects, I like them all.

DNaples

PM  EMAIL  Attn:RR
10-24-2004 09:02 PM  13 years agoPost 7
Dino Spadaccini

rrElite Veteran

USA

My Posts: All  Forum  Topic

Dnaples,

You are totally out of line with this post. You lack the true knowledge about MAH and how it truly works friend. Your commitments about Chris are out of line. As for flying for some one Chris flies for East COAST EXTREME HELIS INC, that’s my self and Tom Silhan my partner. At this point go back from where you came from, bashing Chris or any other persons that we are in evolved with will not and does not bare any weight here.

RIP Roman JR
Capt USA Align Factory Team Align - Conquer Your heart
Team Futaba

PM  EMAIL  GALLERY  Attn:RR
10-24-2004 09:10 PM  13 years agoPost 8
sluggo

rrElite Veteran

Kitchener Ont

My Posts: All  Forum  Topic

Some people should not talk **** about stuff they know nothing about!!! You are way off base and you should back off well you can. First off Dmitry and where never friends at any point. Secound Dmitry is the guy that went behind Alex's back and got the blades into the US. Also Dmitry is the guy recking the MAH name not me. He is pimpingthe blades out of the truck of car and under selling his own dealers and guys he has selling the blades for him. Also Dmitry is the guy bring the blades into the country illegally. Dmitry is the guy running a gray market store trying to undercut anyone that steps in his way. Should I go on!!!!!! I no longer have anything to do with MAH because it is not even a company, it is a guy sitting in his garage in Ukrane making the blades under the noses of the goverment there. Alex had the sole import rights on the blades into Canada through his store Starflite and he still does. So inless you know anything about this shut your ass up and back away from your keyboard.

Yes I did fly for Hirobo and they are a great model but not the one for me. As for getting a better deal deep throating Tims nuts. SORRY dude I don't fly for Tim and don't care to. I fly for me and no one else. Also about making mends with Dmitry it will never happen. Would you make mends with a guy that threaten to kill you or push your family out of your own home? I sure the hell will not. So inless you know what the hell you are talking about please shut your mouth!!!!!!!!

Chris

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
10-24-2004 09:35 PM  13 years agoPost 9
PietervA

rrVeteran

New Zealand

My Posts: All  Forum  Topic

Hey Folks

Back off. These comments offend most of us, as they involve very personal attacks, and have a history that we know nothing of.

My post started with CXD blades, which I've ordered enthusiastically, await impatiently, and am assured by Doug's personal email, will be dispatched soonest.

Please post your vitriol elsewhere.

Regards
Pieter

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 766 views
Scorpion Power Scorpion Power
HelicopterOff Topics › CXD blades
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Tuesday, November 21 - 10:30 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online