RunRyder RC
 5  Topic Subscribe
WATCH
 1 page 1281 views
Scorpion Power Scorpion Power
Helicopter
e-
Miniature Aircraft Whiplash & Furion 6
› 60 Tooth Secondary Gear
10-23-2004 03:45 PM  13 years agoPost 1
Ed Daniel

rrNovice

Pensacola, FL

My Posts: All  Forum  Topic

Has anyone used the 60 tooth secondary gear? If so, what head speeds did you get? Did you have any trouble installing the gear due to its increased diameter?
Thanks
Ed

PM  EMAIL  GALLERY  Attn:RR  Quote
10-25-2004 03:54 AM  13 years agoPost 2
rcman

rrKey Veteran

Logan, Utah

My Posts: All  Forum  Topic

l have the 60 tooth sec. gear installed on one of mine for about 2 months now I really like the feel of this setup
I had to put 2 washers under my battery carbon plates so the gear didn't rub on the lipos but other then that all was easy

I am running MAH G2 700mm main blades. I am going to try some SAB 710 soon. I don't know what my headspeed is I would guess it dropped about 300 but I don't know
I hope that helps, let me know if I can help with anything else
David

PM  EMAIL  GALLERY  Attn:RR  Quote
10-27-2004 03:35 PM  13 years agoPost 3
mikeflyz

rrApprentice

Westlake Village, CA

My Posts: All  Forum  Topic

I have the 60T as well and it flies very nice. I'm running SAB 710s/180g blade weight and it flips quite quickly. The auto performance suffers a bit compared to my Expert with SAB 680s. It runs cool and whenever I can run a cooler electric heli, I know everything will last longer. My kit was shipped with a 52T gear and it ran VERY hot. I'm going to experiment with a 55T later on during the cool season.

Beginning of the flight, the headspeed is 1850 and at the end, it is 1675.

I doubled up the velcro on the batteries to keep them from touching the secondary gear, and it has shown no problems.

Mike

PM  EMAIL  GALLERY  Attn:RR  Quote
10-27-2004 03:46 PM  13 years agoPost 4
Ed Daniel

rrNovice

Pensacola, FL

My Posts: All  Forum  Topic

Thanks for the replies. I am more of a sport flier and don't like the high headspeed.

Ed

PM  EMAIL  GALLERY  Attn:RR  Quote
10-28-2004 02:52 AM  13 years agoPost 5
fitenfyr

rrProfessor

Port Orchard,​Washington

My Posts: All  Forum  Topic

55T is good

I am flying the 55T here now and it works great.
Motor/ESC/Batts never get hot. In fact my batts hardly come up to temp.
The OAT is usually around 60 here, but I flew it in 80 deg and it was still fine.
Headspeed is nice for 3D with that gear.

Anybody have a spare 60T they want to sell. I am in need of one.

Jason Stiffey
Fly Fast....Live Slow...

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-28-2004 04:04 AM  13 years agoPost 6
rcman

rrKey Veteran

Logan, Utah

My Posts: All  Forum  Topic

Mike thats good to hear that the SAB 710 work for you
I cann't wait to try the, Hopefully this weekend


Jason
Can you tell use that blades you are running with your 55 gear

Thanks to all

David

PM  EMAIL  GALLERY  Attn:RR  Quote
10-28-2004 06:30 AM  13 years agoPost 7
fitenfyr

rrProfessor

Port Orchard,​Washington

My Posts: All  Forum  Topic

Two brands

I was running the Mavrikk 700's, but they were a bit on the "soft" side for me. Really flexy and noisy.

I am currently running a set of RotorTech 700's and I really noticed the difference. Much smoother and seem to be very solid feeling.
Basic 3D seems to be fine with them and the roll rate is predictable and precise.
Not quite the feel of the V'blades on my Extreme, but good none the less.

Next is a set of SAB 700's per Chris at MA's recomendation. He says they are really good along with the MAH G2 Dual tapers.

So many blades so little time.

Jason Stiffey
Fly Fast....Live Slow...

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-28-2004 06:35 AM  13 years agoPost 8
rcman

rrKey Veteran

Logan, Utah

My Posts: All  Forum  Topic

Hey Hey Hey
I didn't know SAB made 700 if they do I need to get a set
Can someone tell me were I can get a set
David

PM  EMAIL  GALLERY  Attn:RR  Quote
10-28-2004 04:23 PM  13 years agoPost 9
chriss

rrApprentice

Sunny Florida

My Posts: All  Forum  Topic

"Next is a set of SAB 700's per Chris at MA's recomendation."

Sorry, did'nt mean to be mis-leading there. What I meant to say was the TG 690 "All round 3D" blade. Which is a 690mm tapered blade similar to the MAH G-2 blade except it runs a good bit quieter going through maneuvers.

The SAB's only come in 680 and 710mm. The SAB 680 is a good choice for the Ion-X. But the machine really prefers a 700mm bladed disk.

Chris

PM  EMAIL  Attn:RR  Quote
10-29-2004 04:22 AM  13 years agoPost 10
fitenfyr

rrProfessor

Port Orchard,​Washington

My Posts: All  Forum  Topic

Ooopss

My bad. Thanks for catching it Chris...

We talked about so many things it seems.

If you want the straight scoop and answers to ANYTHING regarding the ION. Chris is the man IMO.

In 10 minutes he wiped out 3 or 4 gear ratios that will get the results I want.

Jason Stiffey
Fly Fast....Live Slow...

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-12-2004 06:03 PM  13 years agoPost 11
d_wheel

rrVeteran

Deep in the heart of​Texas.

My Posts: All  Forum  Topic

Part #?

What are the part #'s on the 55 and 60 tooth gears? Also, where are you folks buying them from?

Later;

D.W.

Gettin old aint for sissies!

PM  EMAIL  GALLERY  Attn:RR  Quote
11-15-2004 01:51 PM  13 years agoPost 12
chriss

rrApprentice

Sunny Florida

My Posts: All  Forum  Topic

Hi D.W.

The part numbers are 124-55 and 124-60.

Chris

PM  EMAIL  Attn:RR  Quote
03-13-2005 04:19 AM  12 years agoPost 13
BobbyG

rrNovice

Vero Beach, FL

My Posts: All  Forum  Topic

Secondary gear 124-60

Does anyone know where to get a 60 tooth secondary gear? My buddy says no stock at Miniature and they may not order another run. Anybody got a spare they would part with?

Bob G

PM  EMAIL  Attn:RR  Quote
03-13-2005 05:35 AM  12 years agoPost 14
rcman

rrKey Veteran

Logan, Utah

My Posts: All  Forum  Topic

I got mine from Rick's theres a link on the Runryder homepage
David

PM  EMAIL  GALLERY  Attn:RR  Quote
03-14-2005 03:26 AM  12 years agoPost 15
MinAirChris

rrNovice

Sunny Florida

My Posts: All  Forum  Topic

We have more of the 60 tooth gears on order now. Should have them soon.

Chris

Previously known as ChrisS

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 1281 views
Scorpion Power Scorpion Power
Helicopter
e-
Miniature Aircraft Whiplash & Furion 6
› 60 Tooth Secondary Gear
 Print TOPIC  Make Suggestion 

 5  Topic Subscribe

Wednesday, November 22 - 2:05 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online