RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 517 views
Scorpion Power Scorpion Power
Helicopter
e-
Electric Battery-Charger-pSupply
› triton charger and poly quest 2600 question
10-20-2004 04:20 AM  13 years agoPost 1
sledge4055

rrNovice

My Posts: All  Forum  Topic

i just recieved my new poly quest 2600 3s pack when after the first charge set at 1.8 amps and 11.1 v as recomended i then discharged it to 9v at 0.5 amps and after charging it again at the same rate as stated above the triton said it only put back 1997mah im not sure if this is right cause there is still 3.1v left on the pack am i correct in thinking this would account for the 603 mah's needed to make 2600mah. ive flown the pack in my plane wich i have a phoenix 25 brushless controller set with 9v cutoff after each flight i discarged the pack at .5amps to 9v and recharged with still only 1997mah going into the pack peaking at 12.6v

another question i have is will the triton charge the li-poly pack from memory cause i havnt been able to go to memory where i have put in under selection (10) 11.1v 2600mah at 1.8 amps charge and 0.5 amps discharge and been able to select it beeing (10) and get it to charge or be able to view any info on it after a charge or discharge. ive only been able to manualy select useing batt type button then li-ion then input the charge voltage and amps then push the rotating button hold it down and then it charges even then i cant see any info being created durring a charge or discharge, in memory .

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 517 views
Scorpion Power Scorpion Power
Helicopter
e-
Electric Battery-Charger-pSupply
› triton charger and poly quest 2600 question
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Thursday, November 23 - 1:17 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online