RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 766 views
Scorpion Power Scorpion Power
Helicopter
e-
Mikado
Other › How to know if Gyro or servo are bad?
10-19-2004 05:09 AM  13 years agoPost 1
Tobias2

rrNovice

Pharr, TX-USA

My Posts: All  Forum  Topic

After my crash I checked radio Tx and Rx about 40 yards away with the Tx antenna collapsed and everything is fine but the rudder servo.

I´m using the Futaba S9254 servo with GY 401 Gyro. The servo moves when I move the boom but it has some glitches. How can I find out what is wrong: servo or gyro?

Thank you.

LOGO 10 3D: 5S3P, C50 15L, Phoenix 80 ESC,13Teeth,GY401, Digital Servos S9650, Tx 9CH-PCM

PM  EMAIL  GALLERY  Attn:RR  Quote
10-19-2004 05:55 AM  13 years agoPost 2
novaman

rrApprentice

Pittsburgh,​Pennsylvania

My Posts: All  Forum  Topic

tobias2

try the gyro system out of the heli by itself to see if does the same thing.

i just had a 9253 go bad in a couple flights, it would piro after a couple minutes of flight, motor was overheating and couldn't hold anymore.
try removing the tail rod and hold the control horn with a " little" pressure and move the rudder stick and feel the servo.
check the gears too that none are stripped aor missing a toooth ot two.

novaman

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 766 views
Scorpion Power Scorpion Power
Helicopter
e-
Mikado
Other › How to know if Gyro or servo are bad?
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Friday, November 24 - 12:22 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online