RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 680 views
Scorpion Power Scorpion Power
HelicopterComputer Flight SimulatorsReflex › Reflex and 9C trouble
10-18-2004 07:46 AM  13 years agoPost 1
Heli-nek

rrApprentice

Vancouver, B.C.​Canada

My Posts: All  Forum  Topic

I just installed the Reflex software, but when the program starts, it always states that it could not find the Reflex interface. I made sure all the connections are good but it is still not working.

Any help will be much appreciated.

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
10-18-2004 03:54 PM  13 years agoPost 2
pH7

rrKey Veteran

Sterling Heights, MI​- USA

My Posts: All  Forum  Topic

I had a similar problem when I first set up XTR. I moved the USB interface to a usb connector on my computer, rather than on a hub and then it started working. (This was suggested in their instructions.) That fixed it for me. YMMV

PM  EMAIL  GALLERY  Attn:RR  Quote
10-23-2004 01:33 AM  13 years agoPost 3
Heli-nek

rrApprentice

Vancouver, B.C.​Canada

My Posts: All  Forum  Topic

Reflex interface

Thanks for the input...

We determined that it was a faulty (brand new) interface. Will need to sent it back to Reflex.

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
10-23-2004 01:54 AM  13 years agoPost 4
Dan C

rrApprentice

Barnsley, Yorkshire

My Posts: All  Forum  Topic

It could be the dongle you have been supplied with it its black oval type thing with wires going in each end open it and check that the wires have not broken free and need resoldering. Mine has done this about 3 times and in the end I have had to make a more secure method of holding the wires in place rather than just the tie wrapp as a strain releif

PM  EMAIL  GALLERY  Attn:RR  Quote
10-23-2004 02:28 AM  13 years agoPost 5
Heli-nek

rrApprentice

Vancouver, B.C.​Canada

My Posts: All  Forum  Topic

Interface

The interface is the blue rectangular one. It is glue together petty good, I am just going to sent it back to Reflex and complain.

Thanks.

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
11-19-2004 03:49 PM  13 years agoPost 6
Vigor3DFX

rrVeteran

Oakthorpe, Midlands,​UK.

My Posts: All  Forum  Topic

I had the same problem.

The blue dongle does come apart quite easily ( 4 clips)
need a thin blade screwdriver to prize it open.

The problem was dry solder joints from the pcb to the usb plug,
3 mins to fix.

Tony

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 680 views
Scorpion Power Scorpion Power
HelicopterComputer Flight SimulatorsReflex › Reflex and 9C trouble
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Friday, November 17 - 11:10 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online