RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 554 views
HelicopterRadio - Servo - Gyro - Gov - Batt › Question on charging discharging 9zhp battery
06-07-2004 03:27 AM  13 years agoPost 1
switch26

rrKey Veteran

San Jose

My Posts: All  Forum  Topic

does any one know how to jump the diode on the 9zhp's battery with out having to modified the pc board inside the battery"s case?

i know there is a web site that shows how but i had to format my hard drive and lost it, they used an external five pin connector.
does any one know the web address to the site?

Regards
switch26

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2004 06:37 AM  13 years agoPost 2
Bushy

rrVeteran

Tucson, AZ

My Posts: All  Forum  Topic

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2004 12:10 PM  13 years agoPost 3
z11355

rrMaster

New England

My Posts: All  Forum  Topic

you can use the 5 pin connector or just a
thin piece of wire (like a staple formed into a
U shape).

hold the pack w/ the white connector toward
you and down. put the U between the 2
RIGHTMOST sockets on the white connector.

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2004 05:03 PM  13 years agoPost 4
Blair

rrKey Veteran

Republic of Canuckistan

My Posts: All  Forum  Topic

Z11355's staple trick is the easiest. In five minutes you can bend enough staples to last you a season (I keep losing the damn things).

Barring that the circuit board mod is quite simple.

I recently upgraded my stock 1100 pack to a 2150mah nimh pack. Twice the flying time and I can charge/discharge to my hearts content.

Blair

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2004 06:06 PM  13 years agoPost 5
Hotwings

rrKey Veteran

Florida, West Palm Beach.

My Posts: All  Forum  Topic

tower sells the jumper for about $.50 get a few they are certainly reasonable, i did. c-ya Ron

Please cancel my clearance, I have the field in sight. Got my RW Turbine Waiver, need lottery!

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2004 06:08 PM  13 years agoPost 6
z11355

rrMaster

New England

My Posts: All  Forum  Topic

Blair,

where'd you find the 2150 brick?

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2004 06:51 PM  13 years agoPost 7
Blair

rrKey Veteran

Republic of Canuckistan

My Posts: All  Forum  Topic

Hi Z11355,

http://www.worldofrc.com/

Rob has the packs assembled by Sanyo.

You just need to pull out your old, tired nicads and solder in the new
assembled "brick". They fit perfectly! In fact it's a perfect time to mod the circuit board too

Great service and price! Big Rob is one of the "Good Guys"

Blair

PM  EMAIL  GALLERY  Attn:RR  Quote
06-08-2004 07:36 AM  13 years agoPost 8
switch26

rrKey Veteran

San Jose

My Posts: All  Forum  Topic

Thank You all

your info sure helps thanks bushy for the link thats what i was looking for,

hey z11355
here is another link where you can find some good batteries
http://www.superbatterypacks.com

PM  EMAIL  GALLERY  Attn:RR  Quote
03-26-2005 09:28 AM  12 years agoPost 9
Evil_Homer

rrVeteran

Cubbington, Warwickshire, United Kingdom

My Posts: All  Forum  Topic

Hotwings,
Do you have the tower part number for the jumper, Ricks is $8.00

PM  EMAIL  GALLERY  Attn:RR  Quote
03-26-2005 11:40 AM  12 years agoPost 10
Ace Dude

rrProfessor

USA

My Posts: All  Forum  Topic

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 554 views
HelicopterRadio - Servo - Gyro - Gov - Batt › Question on charging discharging 9zhp battery
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Wednesday, December 13 - 1:06 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online